Page 1 AVer CB-310 Collaboration Box User Manual...
Page 2 Fe de ra l Com m uni ca ti on s Com m i ssi on NOTE: This equipment has been tested and found to comply w ith the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-vide reasonable protection against harmful interference when the equipment is operate din a commercial environment.
Page 3 ©2020 AVer Information Inc. All rights reserved. All rights of thi s object belong to AVer Information Inc. Reproduced or transmitted in any form or by any means w ithout the prior written permission of AVer Information Inc. is prohibited. All information or specifications are subject to change w ithout prior notice.
Page 4 CONTACT INFORMATION Global AVer Information Inc. www.aver.com 8F, No.157, Da-An Rd., Tucheng Dist., New Taipei City Taiw an Tel: +886-2-2269-8535 AVer Information Inc. www.averusa.com 668 Mission Ct Fremont, CA 94539, USA Toll-free: 1(877)528-7824 Local: 1(408)263-3828 Support.usa@aver.com...
Page 5 Safety and Warning As a valuable offering better audio and visual experience, this product has considered the personal safety factors in design and been tested stri c tly before delivery. How ever, improper installation and use may cause electri c shock or fire. To ensure its safe use, maintain its service life and bring its best performance into full play, please read and understand the operating instructions and nameplates and observe the following safety precautions carefully before using the product, and keep this Manual properly for future reference.
Page 6 WARNING Put the product on a stable surface. An unstable surface includes and does not limit to an inclined plane, a shaky stand, desk or platform, w hich might cause the turnover and damage. Do not open the cover or change the product by your own. High voltage components are installed in the product.
Page 7 WARNING Do not install the product in an im proper place.  Do not install the product in humid places, such as the bathroom, the show er room, the place near w indows or outdoor environments where experience rain, snow or other harsh weather. The product installation is also required to avoid a place around by hot spring vapor.
Page 8 CAUTION For transport: Pack the product for mobility or maintenance by using the cartons and cushioning material provided w ith the product. Keep aw ay from the product when you use a radio. The product design to prevent radio interference complies w ith the international EMI standard.
Page 9: Table Of Contents
HDMI Output Connection ......................8 USB Connection .......................... 9 Microphone Connection ......................9 Speaker Connection........................10 Wall Mount..........................11 Important Safety Instructions .................... 11 Safety information ....................... 11 n ....................12 n ..........................13 Using AVer CB-310..........................16 Power On ............................16 Wizard Setup..........................17 Power Off ............................22 Restart............................23...
Page 10 Screen Lock (Manually)......................24 Mode Switching .........................25 Entry Mode ...........................26 Tool menu ..........................29 Enable Airplay Onscreen Code..................30 Ad vanced Mode ........................33 Basic Information........................39 Edit the Basic Information....................39 Disable the Basic Information ...................41 Enable Basic Information ....................42 Notepad............................43 Disable the Notpad ......................44 Enabel the Notepad ......................45 Schedule .............................46 Edit the Schedule ........................46...
Page 11 Multiple User ..........................67 r ........................67 t .......................69 r Account....................71 Change the Password ......................73 Delete the User Account ....................75 t Management ....................77 Change the Password ....................77 Profile Change Account ....................79 Setup User Account Access Authority............... 82 Login with e Account ....................83 Change Google Account Profile.................
Page 12 Save the PDF file to Google Drive .................117 Change Name of the Note ....................120 Using Whiteboard......................121 Screen Share .......................... 139 Enable Screen Share ...................... 139 Setup Screen Share ......................141 AirPlay Onscreen Code....................141 Incoming request for authorized connection..............142 Device Name ........................
Page 13 App Lock ..........................180 Blue Light Filter ........................183 Volume Adjustment ........................ 183 Wallpaper ..........................184 System Update ........................185 Display Management ......................186 Minimum Server System Requirements ................186 Login ............................187 e Password ....................... 189 e Email........................191 r CB e ....................
Page 14 RS-232Transmission Specifications ..................225 RS-232Communication Format.................... 226 Troubleshooting ..........................227...
Page 15: Product Overview
Product Overview Package Content CB-310 unit Pow er cord and pow er adapter Antenna x 2 AAA battery( for remote controller) Remote control Foot rubber x4 Quick Guide (Stick to the four corners at bottom of CB-310) Accessories USB cable...
Page 16: I/O Ports
I/O Ports (1) (2) (3) (5) (6) (7) (8) (10) Description Description DC pow er jack MIC input port 12V trigger out port Line in port USB 2.0 port Line out port RS232A & RS232B port HDMI1& HDM2 output port IR extender port Antenna port Description...
Page 17: Control Panel
Control Panel (1) (2) Description Power button Mode button Volume +/- button Source button IR receive area LED of mode button(See below table) LED of power button (See below table) Description Pow er - Pow er on: Green - Standby: Red - Pow er off: Off - Upgrading: Flash Red - Backlight off: Green...
Page 18: Pin Definition
Pin Definition RS232 Pin(PC site) IR Pin 12V Trigger Output...
Page 19: Remote Control
Remote Control Please install the battery before using the remote control. Nam e Function Call out the input source selection. Sw itch to HDMI 1, HDMI2, or HDMI3 input source screen. Sw itch to USB input source screen. Call out split screen setup screen. Sw itch between entry and advanced mode.
Page 20 Nam e Function Reset zoom level to 100% (8) Zoom +/- Increase/decrease the screen image magnification. (9) 0~9 buttons Numbers pad. Call out pow er off menu. Use▼ and ▲to select “SCREEN LOCK”, (10) “RESTART” or “POWER DOWN. Press button to confirm the selection. (11) Sw itch to VGA input source screen.
Page 21: Installation
Installation Connect to Laptop/PC Laptop HDMI cable USB cable HDMI cable HDMI cable USB cable VGA cable Laptop...
Page 22: Power Connection
Power Connection Power cable Power adaptor Wall outlet Ethernet Connection Ethernet cable Ethernet port Router/Switch on the Wall HDMI Output Connection...
Page 23: Usb Connection
USB Connection USB flash drive USB mouse Keyboard Microphone Connection Microphone 3.5mm Audio cable...
Page 24: Speaker Connection
Speaker Connection Speaker...
Page 25: Wall Mount
CB-310 has wall mount bracket included and screwed at bottom of the CB-310 unit. Wall mount bracket allow CB-310 to install on the w all or interactive monitor. In the follow ing, it w ill describe how to remove the w all mount bracket from the CB-310 and related installation safety information.
Page 26: S A F E T Y T I P S F O R I N S T A L A T I O N
3. Keep this product aw ay from sprinklers, sensors, high-tension wires and power sources. Do not install it in a location w here vibrations or impacts are likely to occur. 4. To install or adjust the height of the product, tw o or more people are needed. If you try to install or move the product alone, it may fall and cause injury or the product may become damaged.
Page 27: E N T I L A T I O N
Keep clearances around the product according to the minimum dimensions show n in the picture. Never cover the ventilation holes or insert any object into the housing. Do not place the product in a confined space such as bookcase or imbedded closet unless appropriate ventilation conditions are provided.
Page 28 1. First, release the screw at bottom. 2. Lift the collaboration box and let screw out from the gourd hole on the w all mount to separate the w all mount from the unit.
Page 29 3. Mount the mount bracket on the w all or  On the w all: Use the impact drill to drill the interactive monitor. holes and use screw to secure the w all  On the Interactive monitor: Please use mount bracket on the w all.
Page 30: Using Aver Cb-310
Power On Connect the pow er plug to the pow er outlet on the w all. Press the pow er button( on the AVer CB-310 unit. For the first time startup, a w izard will guide you to setup some settings.
Page 31: Wizard Setup
Wizard Setup For the first time startup, a w izard will guide you to setup some settings. The follow ing w ill describe the settings step by step. 1. Language: select the lanuage. Tap the ▼ to select the lanuage. Then, tap “GET STARTED” to continune.
Page 32 2. WiFi setup: Turn on and connect to the WiFi AP. Tap to turn on the WiFi and select the avilable WiFi AP to connect. If user doesn’t enable the WiFi, please remember to connect a Ethernet cable for internet accessing. After connecting the WiFi, tap “Next” to continue. 3.
Page 33 “SAVE” to continue and save the settings. 5. Update FW: AVer CB-310 system w ill check is there new version FW for updating. If there is a new version FW, the update w ill be performed. No update, the message w ill show and tap “NEXT” to...
Page 34 6. Install Gogole Apps: Tap”INSTALL” to install apps. After installation, the AVer CB-310 system will restart. If you skip the steps, please dow nload it from the follow ing link. https://drive.google.com/open?id=1DQEmDT0L-L0232uGOotAbigMYuL5vVDt. 7. Boot source setup: Select the input source to display on screen after boot-up(Home screen,...
Page 35 8. Login: After restarting, login within your google account. And, the CB-310 system is ready for using. If w ant to login later, select “Skip”. [Note]Please make sure the internet connection is w orking. 9. After completing the w izard setup, the main screen is displayed. The main screen w ill be the input source that user selected at “Boot source setup”.
Page 36: Power Off
) on the AVer CB-310 unit, then, the power menu is displayed on screen and select “Pow er Dow n” to turn off the AVer CB-310 system. Also, user can long press power button ) to turn off the AVer CB-310.
Page 37: Restart
Restart ) on the AVer CB-310 unit and select “Restart”. Press pow er button (...
Page 38: Screen Lock (Manually)
Screen Lock (Manually) User can manually turn off backlight. 1. Press pow er button on the AVer CB-310 device. 2. Select “SCREEN LOCK”. The screen will turn to black immediately. 3. While in backlight off status, press power button can bring out the screen.
Page 39: Mode Switching
Mode Switching AVer CB-310 provides tw o mode – Entry and Advanced mode. The default is Entry mode. Press button to sw itch between Entry and Advanced mode. Entry Mode Advanced Mode...
Page 40: Entry Mode
Entry Mode At Entry mode, user can select multiple input sources and Screen Share function. The maximum multiple screen are up to 4. Input source HDMI 1/2/3, VGA only can select one; the Screen Share screen can select tw o. Press ...
Page 42 In input source screen (HDMI 1, 2, 3 or USB), press button on the remote controller will show up the control icon ( ) on screen. Use Zoom in/ out(( ) button on remote controller to operate. 鍵 again can Also, press, ▼, , ...
Page 43: Tool Menu
Select “Settings” will call out setup page. Tool menu To call out tool menu, please connect the USB mouse to the AVer CB-310. Then, select to expand menu.
Page 44: Enable Airplay Onscreen Code
Select w ill return to home screen view. Enable Airplay Onscreen Code Enable/disable the AirPlay code to display on screen for Apple device connection. Please connect the USB mouse to the AVer CB-310 to operate the function. 1. Select「Settings」。...
Page 45 2. Select AirPlay Onscreen code to on status. 3. The Airplay code w ill display on Screen Share screen.
Page 46 4. When tw o Screen Share are displayed, the Airplay code is same.
Page 47: Advanced Mode
Advanced Mode Status icon(WiFi, Bluetooth, Audio) Apps / Infor. notices Notepad Basic Information Area Too bar Tool All Apps  Basic Inform ation: User can define Headline, Secondary Information and Time & Date(Also see Basic Information section).  Notepad: User can w rite the memos in here (Also see Notepad section).
Page 48  All apps: All application programs in the system are displayed in here. Select to expand app list. Tap and hold on the app can move app’s position. If app i s installed by user that can be deleted; Tap and hold on the app and an “X” w ill show on app. Click to narrow down the app list.
Page 49 Application icon can move to the desktop. To delete the App i c on from the desktop, click and hold until “Remove” option i s shown. Then, move the App icon to remove option.
Page 50 Multiple Apps can create a file folder on the screen. First, move the one app to the screen and move another app over the app. Then, a file folder w ill be created. The file folder can be re-named as user w ants;...
Page 51 To delete file folder, click and hold until “Remove” option is shown. Then, move the file folder to remove option.  Notice colum n: Wipe from top to dow n the notice column w ill display. The notice column display the current action that user has done and some reminders.
Page 52  Status icon(Bluetooth, WiFi, Audio)：Tap to display WiFi and Bluetooth status icon. Tap icon can enable/disable the status. Tap “v” to expand the column for volume and backlight adjust bar.
Page 53: Basic Information
Basic Information User can define the Headline, Secondary Information, and set Date&Time on/off on the main screen. Headline Secondary information Date and Time Edit the Basic Information 1. Click and hold the Basic Information to edit. 2. Select “Edit content”.
Page 54 3. In Basic Information dialog, user can select Headline, Secondary Information, and Time and Date to display on main screen or not. Just click to on or off the displaying. 4. After setting, the headline, secondary information and time and date are displayed.
Page 55: Disable The Basic Information
Disable the Basic Information Don’t display the Headline, Secondary information and Time & Date on the screen. 1. Click and hold the Basic Information until the “Rem ove” option is show n. 2. Move the Basic Information to the “Rem ove” option. Then, the Basic Information w ill be disappeared from the screen.
Page 56: Enable Basic Information
Enable Basic Information Click and hold the screen until the “Widgets” option is show n. Select “Widgets” and select and drag the “AVer Basic Information” to the screen.
Page 57: Notepad
Notepad User can w rite memos on the notepad. 1. Click “ ” sw itch to edit mode. 2. Select the color and w rite on the notepad. For partial deletion, select “ ”. To delete all, select “ ”. 3.
Page 58: Disable The Notpad
Disable the Notpad Don’t display the Notepad on the main screen. 1. Click and hold the Notepad until the “Rem ove” option is show n. 2. Move the Notepad to the “Rem ove” option. Then, the Notepad w ill be disappeared from the main screen.
Page 59: Enabel The Notepad
Enabel the Notepad 1. Click and hold the screen until the “Widgets” option is show n. 2. Select “Widgets” and select and drag the “AVer Whiteboard Notepad” to the main screen.
Page 60: Schedule
User can set the class time to remind. The in time class w ill be in bold text. To view other schedule page, tap to sw itch it. Edit the Schedule 1. Click and hold the screen until the “Widgets” option is show n. 2. Select “Widgets” and select and drag the “AVer Whiteboard Notepad” to the main screen.
Page 62 3. Click and hold the Schedule to edit. 4. Select “Edit content” 5. Select the day (Mon ~ Sun) and select “Add item”.
Page 63 6. Then, enter the name for the schedule (ex. Math). The maximum length of name is 15 characters. 7. Next, select the “Hour” and “AM/PM”. 8. Then, select the “Minute” and click “OK” to save the settings.
Page 64 9. A schedule w ill show in list. 10. User can add file and URL link for the schedule. Select “ ” to add file or URL link.  Add File: Select “ ” > Add File and select the file. The added file w ill be listed under the schedule.
Page 65  Link to URL: Select “ ” > Link to URL and enter the URL (ex: www.google.com) and the name of the URL. The added URL w ill be listed under the schedule. Select “ ” can delete the file.
Page 66 11. User can delete the schedule by clicking icon. 12. To add more schedules, repeat above steps. 13. After setting schedule, click “←” to exit from Schedule page. Today’s schedule is displayed on the screen. Click “ ” and “ ”...
Page 67: Disable The Schedule
Disable the Schedule Don’t display the Schedule on the main screen. 1. Click and hold the Schedule until the “Rem ove” option is show n. 2. Move the Schedule to the “Remove” option. Then, the Schedule w ill be disappeared from the main screen.
Page 68: Pinned File
Put the favorite files and links for easily accessing. Enable Pinned File 1. Click and hold the screen until the “Widgets” option is show n. 2. Select “Widgets” and select and drag the “AVer Pinned File ” to the main screen.
Page 69: Edit The Pinned File
Edit the Pinned File 1. Click and hold the Pinned File to edit. 2. Select the “Edit content”. 3. Select “ ” can re-name the page of Pinned file. After enter the name, select “Done” to save. The maximum length is 18 characters. Total is 6 Pinned File pages, select to sw itch...
Page 70 4. Select “Add Item” to add file or URL link.  Add File: Select Add Item > Add File and select the file. The added file w ill be listed on the Pinned File page. To delete, select “ ”. To change the order, tap and hold the “...
Page 71  Link to URL: Select Add Item > Link to URL and enter the URL (ex: ww.google.com) and the name of the URL. The added URL w ill be listed on the Pinned File page. Select “ ” can delete the file.
Page 72: Disable The Pinned Fie
After the setup finished, select “X” to exit the page. User should see the added file and URL link on the Pinned File page. Select file or URL link w ill open the file or the Web page. Select can sw itch to different Pinned File page. Disable the Pinned Fie Don’t display the Pinned File on the main screen.
Page 73: Web Search
Enable the Web Search 1. Click and hold the screen until the “Widgets” option is show n. 2. Select “Widgets” and select and drag the “AVer Web Search” to the main screen. 3. Enter the key w ord or URL to search.
Page 74: Disable The Web Search
Disable the Web Search Don’t display the Web Search on the main screen. 1. Click and hold on the Web Search until the “Rem ove” option is show n. 2. Move the Web Search to the “Remove” option. Then, the Web Search will be disappeared from the screen.
Page 75: Tool Bar
Tool Bar The toolbar is located at both of the screen, tap on the both side of screen to call out the tool bar. Click ” X” to hide the tool bar.  Back: Back to previous screen.  Hom e: Return to main screen. ...
Page 77  Inputs: Select the input source which devices are connected with the AVer CB-310 system through HDMI, VGA, and Type C interface. [Note] Press “ ” on the AVer CB-310 can call out the input source selection.
Page 78: Annotation Tool
Annotation Tool The annotation tool can be used in any input source screen. Select on the main screen, then, select to call out annotation tool. (Eraser): Clear the annotation on the screen. (Pen color): User can select the color and draw /write on the screen. (Save): Save the screen to local disk or external USB pen drive.
Page 79: Split-Screen Mode
Split-Screen Mode The AVer CB-310 system supports 2 split screens display. 1. Select “App Sw itch” from Tool bar. 2. Click the one app and hold, then, move to the side of screen (left or right) to sw itch to split-screen mode.
Page 80 4. The split screen can adjust size by click the edge of split screen and move to left of right side. 5. To return to normal screen display, click the edge of split screen and move the w ay down to left or right side.
Page 81: Multiple User
Multiple User AVer CB-310 supports user login mechanism to allow different users to log in and have their ow n environment settings and save. Before to login w ith user account, please enable the multi user function. 1. Select the “Settings” icon to bring out the Settings page.
Page 82 4. Enter the passw ord (at least 4 characters) and re-enter the password to confirm. 5. After completing password setup, the multi user function is enabled.
Page 83: A D D U S E R A C C O U N T
The Admin account has authority to add new user account. 1. Select “ ” > Multi User > Add User. Enter the user name for the account, ex: Amy. Then, select “NEXT” to set the password.
Page 84 3. Enter the passw ord for the user account (4 characters at least). Then, click “Next” to complete the setup.
Page 85: L O G I N W I T H T H E U S E R Account
1. Press pow er button on the AVer CB-310 unit. Select “LOGOUT”. The logout option w ill show only w hen “Multi user” function has enabled. [Note] The user needs to logout from current account in order to login w ithin your ow n account.
Page 86 3. Select the user account that w ants to login w ithin. Enter the password of the user account and select “LOGIN”. 4. For the first time login, follow the on-screen instruction to complete the start-up. 5. After login, the user should see your account name is displayed on upper right corner of the screen. 6.
Page 87: Change The Password
Change the Password User can change the passw ord of the account. 1. After login, select > Multi User > of your account (ex: You(Amy)). 2. Select Password. Enter the current password.
Page 88 3. Select “Enable” to change the password. 4. Enter the new password and re-enter the password to confirm.
Page 89: Delete The User Account
Delete the User Account The user can delete your ow n account. Once the user account is deleted; the system w ill logout and back to the login screen. 1. After login, select > Multi User > of your account (ex: You(Amy)). 2.
Page 90 3. The system w ill return to the login screen.
Page 91: A D M I N A C C O U N T Management
Change the Password The AVer CB-310 system has tw o default user accounts – Adm in and Guest. The Admin account can be modified; the Guest account is not modifiable. 1. Select of You (Admin) account to change password and enable/disable password.
Page 92 4. Select “Enable” to change the passw ord. 5. Enter the new password and re-enter the password to confirm. 6. If user selects “Disable”, then, the multi user function is disabled.
Page 93: Change Account Profile
Change Account Profile The Admin and user account name and photo can be changed. 1. Select “ ” > Multi User > of your account( ex: You(Admin) or You(Tom)). 2. In account setting page, select account name and change profile dialog w ill show up. 3.
Page 94 4. To change the account photo, click photo and select “Choose photo from Gallery”. 5. In Gallery page, select the photo and adjust the area of photo as you’re w anted. Then, click “Save” to change the photo.
Page 95 6. After changing the photo, click “OK” to complete the changing.
Page 96: Setup User Account Access Authority
Setup User Account Access Authority The Admin can set the permissions of the user account on the system. 1. Select “ ” > Multi User > of user account ( ex: You(Tom)). 2. In App and content access, click of the apps or contents ( that allow user account to access or deny to access.
Page 97: Login With Google Account
Login with Google Account The AVer CB-310 system allow s user to use google account to login. > Multi User and enable “Login w ith google account”. 1. Select 2. Press pow er button of the AVer CB-310 unit and select “LOGOUT”.
Page 98 4. Then, enter your google account and select “Next” 5. Enter your google account password and select “Next”. 6. Then, select “Agree” to accept the term of service and privacy policy. 7. The user can choose to view the tour or skip tour.
Page 99 8. After view the tour, the user can start to use the AVer CB-310 system. The user should see your account is displayed on the upper right corner and the google account has created on the system. User w ill see the google account lists on the login screen next time.
Page 100: Change Google Account Profile
Change Google Account Profile The Google account name and photo can be changed at AVer CB-310 system, but will not change your Google account. 1. Select “ ” > Multi User > of your google account. 2. In account setting page, select account name and Change profile dialog w ill show up.
Page 101 4. To change the account photo, click photo and select “Choose photo from Gallery”.。 5. In Gallery page, select the photo and adjust the area of photo as you’re w anted. Then, select “Save” to change the photo.
Page 102 6. After changing the photo, tap “OK” to complete the changing.
Page 103: Delete The Google User Account
Delete the Google User Account The user can delete your google account. Once the google account is deleted; the system w ill logout and back to the login screen. After login, tap > Multi User > of your account(ex: You(averuec)). 2.
Page 104 The system w ill return to the login screen.
Page 105: L O G I N W I T H C A R D
Enable the Login with Card The AVer CB-310 system allow s user to use chip sensor card reader to login to AVer CB-310 system. 1. Install the card reader to USB port of your AVer CB-310 unit. > Multi User and enable “Login w ith card”.
Page 106 3. User needs to set a password for creating account by card. The password will be used when create an account by card. Enter the passw ord (at least 4 characters) and re-enter the password to confirm. 4. The system w ill ask the user w ants to bind the Admin account w ith card. Select “BIND CARD NOW”...
Page 107 Bind the card w ith admin account is successful. 5. After enable login by card and bind the admin account with the card, user can use the card to login next time. The user should see the “Tap card or Enter Password” message for Admin account at login screen.
Page 108: Create An Account By Card
Create an Account by Card The user can create an account by the card at login screen. 1. At login screen, put your card on card reader and select “Add a new account”.
Page 109 2. Enter the password that user has set for creating account and select “START”. 3. Enter the name for the account and select “NEXT”.
Page 110 4. Set the password (at least 4 characters) for the account and select “NEXT”. 5. Put your card on the card reader and select “OK”.
Page 111 6. The account has created. The user can see the account in the list on the login screen. To login, select the account and put your card on the card reader. 7. For the first time login time, follow the on-screen instruction to complete start-up. The system w ill ask user to change the account password.
Page 112: Change The Password Of The Account
Change the Password of the Account The user can change the password of the account. 1. After login, select > Multi User > of your account (ex: You(Bob)). 2. Select “Password” and enter the current password.
Page 113 3. Select “Enable” to change the password. 4. Enter the new password and re-enter the password to confirm.
Page 114: Bind The Card For Login
Bind the Card for login User can bind the card on the exiting account. 1. After login, select > Multi User > of account (ex: Doris). [Note] User can login w ithin admin account or user account. 2. Select “Bind card for login” > Enable.
Page 115 3. Put your card on card reader. When successful message display, the card binding is completed.
Page 116: Delete The Account
Delete the Account The user can delete the account. 1. Login w ith your user account, select > Multi User > of your account (ex: You(Bob)). 2. Select > DELETE.
Page 117 3. The system w ill return to the login screen.
Page 118: Cloud Storage
Cloud Storage Create the google drive on AVer CB-310 for file accessing and storage. Build an Account 1. Open the ES file explorer from All apps on the main screen. 2. In ES file explorer screen, select Network > Cloud Drive.
Page 119 3. In Cloud Drive screen, select “Log in to Google Drive”. 4. Login w ith your google account, then, select “Next”.
Page 120 5. Enter your Google account’s password and select “Sign in”. After sign in, the google drive is build.
Page 121 7. For another cloud account, click “New ” or “+”. 8. Then, select “Gdrive” and follow on-screen instruction to build the cloud drive.
Page 122: Open A File From The Cloud Storage
Open a File from the Cloud Storage 1. Open the ES file explorer > Netw ork > Cloud > your Google drive account. 2. Select the file from your google drive. Wait for selected file w ill be dow nloading to local disk to open.
Page 123 3. The file is opened by OfficeSuite. 4. If file is a *.ppt file. Select > Start slide show can switch to slide show mode.
Page 124 5. Select can edit the file. 6. Edited file can be saved as PDF file. Select to save the edited file.
Page 125: Set Password For Es File Explorer
Set Password for ES File Explorer Set the password to protect ES File Explorer. 1. Open ES file explorer and select “Settings”. 2. Select “Password Settings”.
Page 126 Enter the password and re-enter password to confirm. Then, select “OK” to complete.
Page 127: Whiteboard
Whiteboard Select on main screen to call out Whiteboard application. Tutorial For the first time use, the tutorial will guide the user how to use whiteboard; select to go next step, select to back previous step. Select the tutorial w ill close, select can continue the tutorial.
Page 128: Note Format
Note Format The note page has different format and user can choose the proper format to use. and select “Note”. Also, user can select “Default note”. The default note w ill be a 1. Select blank page. 2. The note formats are category in Standard, Grid, Math&Engineering, Music, Sports, and Planners&Lists.
Page 130: Import Pdf
Import PDF User can import the PDF file from external USB pen drive, local (AVer CB-310 system), or Google drive into w hiteboard. and select “Im port PDF”. 1. Select 2. Locate the PDF file. If user wants to open the PDF file from Google drive, select ES file explorer >...
Page 131: Save The Pdf File To Google Drive
Save the PDF file to Google Drive [Note] The Google drive must have built on AVer CB-310 (See also chapter of Cloud Storage). 1. In Whiteboard note page, select > Export. elect “Pages” is “Entire note” and “File format” is “PDF”. Next, select “Share”.
Page 132 3. Select “ES Save to”. 4. Select ← to go to main root directory. Then, select your Google drive.
Page 133 5. Select the folder and select “Select”. The note page w ill be saved to your Google drive.
Page 134: Change Name Of The Note
Change Name of the Note User can rename the note. 1. Select the note name is located at left bottom corner. 2. Enter the new name of the note and select OK to confirm.
Page 135: Using Whiteboard
: Pen function includes pen, eraser, mark, shape, and text function. : Color selection. User can select the color of pen, text, shape, and background of note. (Add image): Take a picture from camera that is connected with AVer CB-310 or select an image to display on w hiteboard.
Page 136 Select and hold the page number w ill call out note page action dialog.  Select all: Select all contents on the page. After selecting, the page w ill change to edit mode.  Clear page: Delete all contents on the page. ...
Page 137 Pen ( The function includes pen, eraser, mark, shape and text functions.  Pen Type: Pen has three types – pencil ( ), highlight pen ( ), and pen ( - Multitouch: Allows multiple users to w rite on the screen. - Pressure: To make w riting more smooth.
Page 138 - Color Depth: Highlight pen can adjust color depth. - Color: The color of all pens can be changed. Select the type of pen and go to Color selection ( and select the color.
Page 139  Select( Allows user to select the object on the screen to edit. After selecting, the screen w ill sw itch to edit mode. In edit mode, user can modify the selected object. Select and use finger to select the object on the screen and the screen w ill switch to edit mode. In edit mode, select can sw itch to w hiteboard screen.
Page 140 In edit mode, user can perform the follow ing actions. : Change the color of selected object. : Change thickness of strokes and shapes. : Cut the selected object. The cut object can be pasted on the note page. Select paste.
Page 141 Duplicate the selected object. The duplicate object w ill paste on note screen immediately. : Delete the selected object.  Eraser( To clear the handw riting or drawing on screen as required. : Clear large area. : Clear part by part.
Page 142  Shape( Draw the shape object on the note page. Shape objects are included line, square, and round. Move the dot to adjust thickness of the shape object.  Text( Type the text on the note page. Move the dot to adjust the font size of the text.
Page 143 Select and enter the text and select OK.
Page 144 Color ( Change the color of pens, Shape, and text. Select the pen, shape, or text function first, then, select to select the color. Select can define the color on your ow n.
Page 145 Add image( To take a picture from connected camera or select an image from local or external USB pen drive.  Take picture Take pictures from connected camera. Please make sure the camera is w ell connected and pow er on. and select “Take picture”.
Page 146 3. After accepting the picture, the screen will switch to edit mode. Touch the picture can move picture around. Select can back to w hiteboard screen.
Page 147 : To crop the image. In Crop mode, user can do follow ing action: Select all Detect face Rotate left Cancel Rotate right Save Select can go back to edit mode. : Cut the picture. The cut image can be pasted. Select to paste.
Page 148  Choose image Select an image from local hard disk or external USB pen drive. and select “Choose image”. Select 1. Select the image from local or external USB pen drive.
Page 149 2. The image can be edited. : To crop the image. In Crop mode, user can do follow ing action: Select all Detect face Rotate left Cancel Rotate right Save Select can go back to edit mode. : Cut the picture. The cut image can be pasted. Select to paste.
Page 150 Sub-menu(  View Only: Change to view only mode. No action can be operated. Select can back to normal mode.
Page 151  Export: Export the note page or all note pages to PDF, PNG, JPEG file and share to specific path. Select “SHARE” and select the type to share.
Page 152  Print: To print out the note page.  Page Setting: Change background (note format), note page size, and color of note page.  Paste: In edit mode, user does the cut, copy, or duplicate and select “Pas te” from sub-menu list can be pasted the object on note page.
Page 153: Screen Share
Screen Share Devices are able to interact directly w ith the collaboration box across all platforms (Window s, iOS, Android, Mac) and share content w irelessly without any app or add-on hardware installation. Enable Screen Share 1. Netw ork Setup (Ethernet & WIFI). [Note] a.
Page 154 3. Please make sure collaboration box device and your sharing device is in the same netw ork. [Note] If you w ant to share via Miracast, you don’t need to setup the same netw ork between your devices. 4. Use device’s’ default mirror function to search the collaboration box name. [Note] Each collaboration box has different Panel Name.
Page 155: Setup Screen Share
Setup Screen Share AirPlay Onscreen Code Enable/disable the AirPlay code to display on screen for Apple device connection. 1. Select Screen Share > 2. Select AirPlay Onscreen code to enable.
Page 156: Incoming Request For Authorized Connection
3. Then, the AirPlay code is displayed on Screen Share screen. User can click “ ” to refresh the AirPlay code. Incoming request for authorized connection Enable/disable for multiple connection authority. [Note] For multiple connections, still only one device screen can be displayed on the screen. Select Screen Share >...
Page 157 Select Incom ing request for authorized connection > Enable with 10/20/30 seconds timeout. The authorization request w ill display on screen for 10/20/30 seconds when connection request i s coming. The default is Disable.
Page 158: Device Name
Device Name Change the collaboration box name that use for connection identity. Select Screen Share > Select Device Nam e > Enter the new device name > OK.
Page 159: Sharing Content From Apple Product To The Collaboration Box
Airplay is a proprietary protocol developed by Apple Inc. that allows wireless display on Airplay-enabled devices. How to use AVer Screen Share app via Airplay? 1. Enable netw ork connection (Ethernet or WIFI) 2. Open the screen sharing app ( 3.
Page 160 2. In Control Center, tap Screen Mirroring, then select your Panel Nam e from the list. 3. Don’t see your panel name? Try connecting your iOS device to the same Wi-Fi netw ork as the panel you w ant to Airplay to. 4.
Page 161 To share your Mac computer’s desktop to the panel 1. Click on the Airplay icon on the right side of your Mac’s menu bar. , then select your collaboration box name from the list. 2. To turn off Airplay Mirroring, click on Airplay icon on the right side of your Mac’s menu bar, click on Turn Airplay: Off or Airplay: Off.
Page 162 Refer to Screen Share Netw ork Requirements document for more details. http://averusa.com/classroom-technology/downloads/AVer-IFP-Screen- Share-Netw ork-Requirements.pdf  The video and audio are If your network is slow or congested, Screen Share is affected.
Page 163 Supported Apple devices and operating systems 1. Operation systems  iOS 10 or later  OS X 10.11 (El Capitan) or later 2. Apple devices  iPhone 4S or later  iPad Air or later  MacBook 12-inch or later ...
Page 164: Sharing Content From Chrome Solution To The Collaboration Box
Chromecast is Google cast, it is a proprietary protocol developed by Google that allow s w ireless display on Chromecast-enabled devices. How to use AVer Screen Share app? Enable netw ork connection (Ethernet or WIFI) Open the screen sharing app ( If connected via Wi-Fi, please check that the netw ork name displayed on your screen share main page is the same as the netw ork your device is connected to.
Page 165 To share content from the Chrome book to the panel In menu, click Cast devices available , and then select your Panel Nam e from the list. [Note] Cast to Desktop is recommended to share your screen. In menu, click Stop for disconnecting.
Page 166 Refer to Screen Share Network Requirements document for more details. http://averusa.com/classroom-technology/downloads/AVer-IFP-S creen-Share-Network-Requirements.pdf  The video and audio are out of If your network is slow or congested, Screen Share is affected.
Page 167 Supported Chromebook devices and operating systems Operating system  Chrome OS 59 or later Chromebook devices  Acer Chromebook C11 C740-C4PE  Dell Chromebook11 P22T001  HP Chromebook 14 -ak010nr  HP Chromebook 14 G4...
Page 168: Sharing Content From Windows Computer To The Panel
It is the Wi-Fi Direct standard, w hich allows for point-to-point connection between devices without the use of router. How to use AVer Screen Share app via Miracast? Open the screen sharing app( Please make sure your panel and sharing device are in the same netw ork.
Page 169 To share content from the Windows 8.1/10 OS(Windows settings) Go to Windows settings and click devices to add Bluetooth or other device that you can connect the panel w ith desktop mode. Click Wireless display or dock and Window s will start search the Miracast devices around you. Click “disconnect”...
Page 170 Refer to Screen Share Netw ork Requirements documentation for details. http://averusa.com/classroom-technology/downloads/AVer-IFP-Screen-S hare-Netw ork-Requirements.pdf  If you can’t add the panel, wait for it to become ready and then try When using Miracast, you can’t add or...
Page 171 Issue Solution  The video and audio If your network is slow or congested, Screen Share is affected. Contact are out of sync. your administrator.  Not all devices are designed for video encoding for Screen Sharing, so video streaming might not behave as expected. ...
Page 172: Sharing Content From Android Device To The Panel
It is the Wi-Fi Direct standard, w hich allows for point-to-point connection betw een devices without the use of router. How to use AVer Screen Share app via Miracast or Chromecast? Enable netw ork connection (Ethernet or Wi-Fi)
Page 173 Connecting the panel to a wireless netw ork might help the connection between the panel and a mobile device or computer that’s connected w irelessly. Refer to Screen Share Netw ork Requirements document for details. http://averusa.com/classroom-technology/downloads/AVer-IFP-Screen -Share-Netw ork-Requirements.pdf...
Page 174 Issue Solution  Trouble mirroring your All devices running Android 4.4.2 or higher support the Cast Screen Android screen with feature. How ever, some Android devi c es may not have the necessary built-in screen mirroring pow er to provide an optimized Screen casting experience. function? ...
Page 175: Grouping And Draw Function
Grouping and Draw Function The grouping and draw lots function help the user to do group w ork, competitions and draw lots to do the question answ er. Draw Lots to expand app list and select “Grouping & Draw ”. 1.
Page 176 Next, enter the number that wants to exclude. If there is no number wanted to exclude, just leave it. Tap “X” can remove the number from exclude list. Tap “Next” to set the how many people are drawn. Tap “+” to add up the number and “-“to decrease the number of people.
Page 177 Tap “DRAW” to draw. The result will display it. Tap “RE-DRAW” can draw again.
Page 178: Grouging
Grouging to expand app list and select “Grouping & Draw ”. 1. Click 2. Tap “Grouping”. 3. Enter the Range (1~100), ex: 1~60.
Page 179 4. Next, enter the number wants to exclude. If there is no number wanted to exclude, just leave it. Tap “X” can remove the number from exclude list. 5. Tap “Next” to set the how many groups to divide. Tap “+” to add up the number and “-“to decrease the number of group.
Page 180 6. Tap “GROUPING” to grouping. The result w ill display it. Tap “REGROUP” can grouping again. The number in color means group leader and the group leader can be re-assigned; just tap the number you w ant.
Page 181: Gallery
Gallery In gallery, use screenshots, pictures, and share screenshots/pictures to specific location. Select “Gallery” from app lists at main screen. View images To view the images, select the image or select the folder and select the image to view.
Page 182: Using Browser
Using Browser User can operate the brow ser same as on PC. Select the “Chromium” to launch the brow ser app.
Page 183: Connect To Docam
1. Select Sphere2 from app list at main screen. 2. Please make sure the DocCam and the AVer CB-310 system are at same local netw ork. The Sphere2 w ill auto search the available DocCam on your local netw ork and list on screen.
Page 184: Internet Connection
There are tw o w ays to access the internet – Ethernet and WiFi connection. Ethernet Connection Using Ethernet cable connects AVer CB-310 to your local netw ork. [Note] Turn off the WiFi function if WiFi connection has connected. Ethernet cable...
Page 185: Wi-Fi Connection
Wi-Fi Connection Connect AVer CB-310 to internet through the W-iFi AP . 1. Select the “Settings” icon to bring out the Settings page. 2. In Settings page, select “Netw ork”.
Page 186 3. Set Wi-Fi to “On”. 4. Select available Wi-Fi netw orks to connect.
Page 187: Adjust Date And Time
Adjust Date and Time 1. Select the “Settings” icon to bring out the Settings page. [Note] The internet connection is required for auto date and time adjustment. In Settings page, select “Date & Tim e”.
Page 188 3. You can select “date”, “Time”, “time zone” and “time format” to setup.
Page 189: Power Saving
Power Saving The AVer CB-310 provides tw o(2) type of power saving modes – Screen saver and Auto Backlight off . Screen Saver Enable AVer CB-310 to screen protect mode after AVer CB-310 system is idle in certain time. 1. Select Settings > Display > Screen Saver.
Page 190: Energy Saver
Energy Saver The AVer CB-310 w ill turn the backlight off after certain idle time that user has set. While backlight is off, the apps and video outputs w ill be stop operating. Tap Settings > Display > Energy Saver...
Page 191 3. Select the “Energy Saving Options” to set the energy saver start time.
Page 192: Screen Lock
Screen Lock Protect screen by password. 1. Select Settings > Security > Screen lock. 2. Select “Password” option to set password protection.
Page 193 3. Enter the “New Passw ord” and re-enter the password to confirm. 4. Screen lock has tw o modes – Automatically Lock and Pow er button instantly lock. User can set the time period for automatically lock. 5. To disable screen lock, tap Settings > Security > Screen Lock and enter the password user has set.
Page 194: App Lock
App Lock Protect the app w ith password. 1. Select Settings > Security > App Lock. 2. Enter the password that user wants to set.
Page 195 3. Select the apps that w ant to be protected by password. 4. When user select the app has been locked, a password is required. 5. To un-lock the locked app, tap Settings > Security > App Lock > Enter password > un-selected the app.
Page 196 6. Change App Lock password. Tap Settings > Security > App Lock > Change password. Enter the old password, then, enter the new password and re-enter new password to confirm. Tap “YES” to change the password.
Page 197: Blue Light Filter
Select Settings > Display > Enable the “Blue Light Filter”. Move the dot to adjust blue light filter range. Volume Adjustment Press on AVer CB-310 panel can adjust system volume. Or w ipe-down the notice column and expand it. Then, move the volume adjust bar to adjust volume.
Page 198: Wallpaper
Wallpaper Change the w allpaper. 1. Click and hold on the screen until the “Wallpaper” option is show n. 2. Select the “Wallpaper” and select the w allpaper in system default. Or select “My Photos” to select other picture to be the w allpaper.
Page 199: System Update
System Update Select Settings > About > System update and system update w ill start. The system update takes time; w e recommend doing the system update w hen the machine is not in use. If there is no update, select “Close” to finish.
Page 200: Display Management
Display Management To manage the AVer CB-310 devices on your LAN – manual pow er on/off/reboot AVer CB-310 and scheduling AVer CB-310 for pow er on/off/reboot. [Note] An Ethernet cable connection is required for AVer CB-310 devices. Please dow nload the Display Management application from http://www.aver.com/download-center...
Page 201: Login
Login Run the AVer Display Management application. The login dialog is displayed. Enter the passw ord; for the first time login, the default password is “adm in”. After entering the password, select “Login” to login. Enter the email for sending password if forgot the password in future. Select “Enter” to login.
Page 202 After login, the Display Management UI is displayed.
Page 203: C H A N G E Password
Select “ ” icon. The email and password dialog w ill show up. Select “Change Password”. Then, enter the new password and re-enter the new password to confirm.
Page 204 Select “Save” to save the changes.
Page 205: C H A N G E Email
Select “ ” icon. The email and password dialog w ill show up. Enter the new Email address. Then, select “Save” to save the changes.
Page 206: A D D A V E R Cb R - 3 1 D E V I C E
In Add Device dialog, you can choose “IP Address Search”, “Auto Detection”, or “Mac Address Search” to find the AVer CB-310 on your LAN netw ork. [Note] a. An Ethernet cable connection is required for AVer CB-310. b. The AVer CB-310 and Display Management must be in the same netw ork.
Page 207 The search result w ill be listed. Select the AVer CB-310 and enter “Device Nam e” and select the “Group” if there are groups for selecting. Select “Save” to add. The added AVer CB-310 w ill be listed in device list.
Page 208 To find added AVer CB-310 devices by searching condition or keyw ord. Select the filter condition – Device Name, Model Name, Mac Address, FW Version or IP info or enter the keyw ord to filter. Then, the filter result w ill display.
Page 209 Create the group and assign AVer CB-310 devices to specific group for managing. 1. Select “Add Group” in Settings screen. 2. Enter the group name in Group dialog and select “Save”.
Page 210 3. The created group w ill list at left side of Settings screen. Select the group to view the AVer CB-310 devices in the group. When add AVer CB-310 device, you can assign AVer CB-310 device to the group. 4. Select “...
Page 211: P O W E R O N , Off , , A N D R E B O O T A V E R C B
In Device Control screen, display the AVer CB-310 devices that have added into Display management app. You can manually power on, power off, and reboot the AVer CB-310 devices that list in Connected List screen. [Note] a. An Ethernet cable connection is required for AVer CB-310 devices.
Page 212 Then, select “Pow er on”, “Power Off”, or “Reboot” button to execute. [Note] a. After selecting AVer CB-310 device, the pow er on, power off and reboot button w ill be enabled. b. The AVer CB-310 devices display order can be change by select A -Z order or group (drop-down...
Page 213: S C H E D U L I N G
Set the specific day and time to pow er on, pow er off, and reboot the selected AVer CB-310 devices. The schedule w ill execute until you disable the schedule. [Note] a. An Ethernet cable connection is required for AVer CB-310 devices.
Page 214  Group: Select AVer CB-310 devices by group.  Select Device: Select AVer CB-310 device one by one from AVer CB-310 device list. [Note] Use filter function to find the AVer CB-310 devices if you know AVer CB-310 device’s name or group.
Page 215 From Enable drop-dow n list, select “Disable” can stop schedule to run. Select “ ” can modify and edit schedule’s setting.
Page 216: F I R M W A R E Update
Update the AVer CB-310 firmware by scheduling or update now. Scheduling the Firmware Update Set a schedule to update the selected AVer CB-310 devices. 1. Select “Schedule Setup” > “Add Schedule”.
Page 217 2. Select “Firmware Update”. The firmware update dialog is displayed.
Page 218 3. Select the AVer CB-310 device and set the date and time for firmware update. [Note] To find the AVer CB-310 device, use filter condition or enter keyword to find.
Page 219 4. Select “Add Schedule”. The firmware update schedule will be added to the list. 5. To disable the firmware update schedule, select “Disable” from drop-list. Select can delete, edit and view report.
Page 220: Update Firmware Now
Update Firmware Now When Display management has detected new firmware available, user can update AVer CB-310 device firmware immediately. When a new firmware is available, Display Management will show the notice on screen to inform user.
Page 221 Select “Setup Update” or select “Schedule Setup” > “Add Schedule” > “Firmware Update” > “Update Now”. The update screen will display.
Page 222 Select the AVer CB-310 device and select “Add Schedule” The update will be progressed. In firmware update list, user can see all devices’ firmware status – Successfully, Not Start, Failed, and Updating.
Page 223: View Update Report
View Update Report User can view the report of firmware update. In Schedule Setup page, select “Firm ware Update” from drop-down list. 2. Select > Report. 3. In report, list all devices’ firmw are update status. Select the tap page to view in different status.
Page 224: Broadcast
Broadcast Set a message or audio message at specific time to broadcast on the specific AVer CB-310 device. 1. Select “Broadcast”. 2. Select “Add Broadcast”.
Page 225  Audio: Audio selections have “None”, “Default 1”,“Default 2”, “Default 3”, and “Upload file”.  Wake Pow er-off device to broadcast: To pow er on the AVer CB-310 device for broadcasti n g w hen device is pow er off.
Page 226  Select text in the status bar can sort the order. When arrow i s in bold with, it means current selection. 5. Schedule: Setup broadcast time. After selecting the device, the schedule w indows will display. Select date, hour and minute to set the broadcast time.
Page 227: Broadcast List
6. After setting broadcast schedule, select “Broadcast” to complete. 7. Broadcast Now : After selecting the device, select “Broadcast “and the broadcast will play immediately. Broadcast List  Upcom ing: List the broadcasts not play yet. User can “Edit”, “Delete”, “Duplicate” and “ Move to pending”.
Page 228  to check “Report” or “Duplicate”, Com pleted: Broadcast has been play. User can select “Delete”. Select can play audio message.  > “Edit” to complete the Pending: The broadcast is um-complete setting. User can select setting. To delete, select “Delete”. Select “Duplicate” can copy the broadcast to edit as another broadcast.
Page 229: User Account
User Account To create user account and synchronize with AVer CB-310 device. Select “Settings” > “User Accounts”. Maximum accounts are 50.
Page 230: Enable Setup From Server
Enable Setup from Server Enable remote management function to synchronize with AVer CB-310 device. 1. Select “System Settings”. 2. Enable “Setup from Server” and “Multi-user function”. When enable multi-user function, the password is required. After enabling, Admin passw ord function is enabled, too. If user w ants to change admin password, select “Change Password”.
Page 231: Add User
Add User 1. Select “Add User”. 2. Enter “User Nam e”, “Password” and “Confirm Password”. Then, select “Next”. 3. Tap the card for login if user w ants. If not, select “Skip”.
Page 232 4. Select “Save” and the user account is displayed in list page. 5. Select Device: Select the device for synchronization. Select “ ” > select device > “Save”. [Note] Search device:  Select “By Device” and “By Group” to search device. ...
Page 233 6. Perm ission of Users : Setup app use and install authority. Select “ ” > “Permission of Users”...
Page 234 7. Select “Sync Now” to synchronize with remote AVer CB-310 devi c e. When synchronize successful, all user accounts are displayed. 8. Select “ ” to check synchronize report.
Page 235 ” > “Edit user account”, user can edit User Name, Passw ord and Bind card login of the user account. 10. Login to AVer CB-310 device, user can see the user accounts has synchronized .Also user can check user accounts in “Setup” > “Multi user” after login.
Page 236: Import List
3. Select “Import List” > “Import”. Then, the user accounts will be added and displayed. Select Device: Select the device for synchronization. Select “ ” > select device > “Save”. Select “Sync Now” to synchronize with remote AVer CB-310 device. When synchronize successful, all user accounts are displayed.
Page 237: Specificaion
Specificaion Android Version Android 7.1 RAM/ROM 4GB DDR3/ 8GB Dual-core ARM Cortex-A72 1.8Ghz processor and Quad-core ARM Cortex-A53 1.4Ghz processor ARM Mali-T860MP4 Input /Output HDMI input x3 (Max. 1920x1080) (Included resolution) VGA input x1 (Max. 11920x1080) USB-type A x2 HDMI output x2 (Max. 4K) USB-type B Ethernet Giga‐Ethernet...
Page 238: Multimedia Supported Formats
Multimedia Supported Formats Type Form at File Extension Image JPEG、BMP、PNG .jpg\.bmp\.png Video MPEG1、MPEG2、MPEG4、H264、RM、 .avi\.mpg\.dat\.vob\.div\.mov\.mkv\.rm\.r RMVB、MOV、MJPEG、VC1、DivXFLV mvb\.mp4\.mjpeg\.ts\.trp\.w mv\.asf\.flv Audio MP3、M4A（AAC） .mp3\.m4a RS-232 Pin Definition Pin define 3.5mm ST RS-232 Send Commands Table Baud Rate: 115200 bps Data bits: 8 bits Parity: None Stop bits: 1 bits Send Format: Device ID(Default 0x00) + 0x52 + 0x04 + 0x00 + Command + Data[0] + Data[1] + 0x50 + Checksum(*1)
Page 239 Function Com m and Data[0] Data[1] Pow er 0x01 0x00 : Stand By 0x00 0x01 : Pow er On Input Source 0x02 0x00 : HDMI 0 (Front) 0x00 0x01 : HDMI 1 0x02 : HDMI 2 0x03 : VGA 0x04 : Type C 0x05 : OPS Set ID 0x05...
Page 240 RS-232Communication Format Device ID 0x00 0x00 Code(1 Byte) Receive Device 0x52 0x52 Code(1 Byte) Data Length 0x04 0x04 Code(1 Byte) Type Code(1 Byte) 0x00 0x10 Command Code RS-232 Send Command Table RS-232 Get Command Table (1 Byte) Data[0] Code RS-232 Send Command Table 0x00 (1 Byte) Data[1] Code...
Page 241 Troubleshooting Sym ptom Possible Cause Solution The screen does not display Looseness of power plug, Check if the pow er cord is anything; there is no sound, pow er connection failure properly connected and the indicator does not come on Enter “Picture”...
Page 242 Sym ptom Possible Cause Solution A link cannot be accessed via 1. Wrong netw ork parameter 1. Ask the netw ork the brow ser configuration administrator for available 2. Improper netw ork netw ork IP addresses and connection other parameters 3.

AVer CB-310 User Manual

Quick Links

Need help?

Questions and answers

Related Manuals for AVer CB-310

Summary of Contents for AVer CB-310

Table of Contents