Obudowa Czytnika Kart Smart; Removing The Smart-Card Reader - Dell Precision 7750 Service Manual

Steps
1. Carefully route the keyboard and keyboard backlight cable through the inner frame and place the inner frame on the computer chassis.
2. Replace the six (M2x5) and the nine (M2x3) screws to secure the inner frame in place.
3. Route the WLAN and WWAN antenna cables through the routing guide.
Next steps
1. Install the WLAN card.
2. Install the WWAN card.
3. Install the primary M.2 SSD.
4. Install the battery.
5. Install the base cover.
6. Install the SD card.
7. Follow the procedure in

Obudowa czytnika kart Smart

Removing the smart-card reader

Prerequisites
1. Follow the procedure in
2. Remove the SD card.
3. Remove the base cover.
4. Remove the battery.
5. Remove the primary M.2
6. Remove the WLAN card.
7. Remove the WWAN card.
8. Remove the inner frame.
after working inside your computer.
before working inside your
SSD.
computer.
Demontowanie i montowanie 51