MFB -301 Pro Operating Manual page 13

Carrying out a Firmware-Update
The MFB-301 Pro offers a built-in update function. To carry out a firmware-update, you will
need a corresponding .bin file, which will be supplied to you sporadically from MFB's website
or (whenever needed) by MFB's support.
Make sure, the MFB-301 Pro has successfully been connected to the computer via

USB and has been detected by HTerm.
Click on Send File in HTerm.

Locate the update file on your computer, e.g.: MFB-301P_VerX_X.bin and click on

Open.
Switch off your MFB-301 Pro.

Press Rec and Play on your MFB-301 Pro and switch the unit back on.

Release both buttons.

Double check if the USB-connection to your MFB-301 Pro is still present in HTerm.

Press Start in HTerm to initiate the data transfer.

Switch the MFB-301 Pro off and back on afterwards.

You may double check the current firmware-version anytime.

See Displaying the Firmware-Version
5