2 hours, making sure the moisture inside the unit is all evaporated. � Humidity precautions Do not expose the unit in rain, or place in high humidity area. Please make sure indoor environment is dry and cool. Normal operating humidity is 10%~90%RH. i3TOUCH EX Series - Manual...
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. i3TOUCH EX Series - Manual...
Control Panel � Prepare to install Parts Magnetic stylus holders Bottom loudspeakers Power indicator light Remote control signal receiver Light sensor PIR sensor Multi-function button Press: energy saving mode Hold: Power off i3TOUCH EX Series - Manual...
USB 2.0. Connect USB devices such as mobile hard disk, USB drive, USB keyboard and/or mouse, etc. AC In AC power input, connect AC power supply AC Switch To open or shut down AC power supply. “I” means power on, “O” means power off i3TOUCH EX Series - Manual...
Page 9
Increase / reduce the volume F1-F12 PC's F1 - F12 function keys (Windows, Linux, MacOS) NOTE: All computer related function keys are available only when the computer is connected to the display via Touch USB connection. i3TOUCH EX Series - Manual...
Remote control can work with a maximum range of 8 meters distance, 30 degrees left and right from the remote-control receiver. In order to protect environment, please dispose waste batteries into recycling box. Warning: if the battery is replaced by an incorrect type, it may lead to explosion. i3TOUCH EX Series - Manual...
Recommended computer configuration: • 1 GB Available Hard Drive space • 2.0 GHz Processor, 1GB RAM • More than 256 color display cards • VGA OUT / HDMI OUT, Audio-OUT, USB Interface • Supported Resolutions 800*600,1024*768,1920*1080,3840*2160 i3TOUCH EX Series - Manual...
Page 12
After using serial port cable to connect central control equipment and machine, certain function of the ma- chine can be controlled via central control equipment, such as: machine ON/OFF, and adjustment of sound volume, etc. i3TOUCH EX Series - Manual...
Page 13
� LAN connection � USB connection i3TOUCH EX Series - Manual...
The whiteboard button opens an interactive whiteboard that allows you to take notes, make drawings or facilitate workshops. The output can be shared very easily with all participants. WHITEBOARD Tap the whiteboard button. 2. Start writing in the active tab. 3. Activate the writing options by tapping the eraser. i3TOUCH EX Series - Manual...
3. Start the Whiteboard application. Start the Present application. Work with Annotate and make annotations on everything that appears on the screen. 6. Switch between the input sources of the display. Adjust volume of the loudspeakers. i3TOUCH EX Series - Manual...
2. Open the file explorer app 3. Open the WPS offices app Open more apps APPS � The settings menu In the bottom right corner, you can find the button to access the settings menu. SETTINGS i3TOUCH EX Series - Manual...
After connecting to the internet, verify that your display is running the latest firmware. In the settings application, press "About Device". Press the "Check Update" button to validate your firmware version online. If a newer version is available, this button will provide instruction to update your device. i3TOUCH EX Series - Manual...
The i3TOUCH EX also features an environment light sensor to automatically adjust the brightness. Turn "Automatic Brightness Control" on to activate this feature. � Audio settings Adjust the "Sound Output Settings" and pre-defined audio environment settings. i3TOUCH EX Series - Manual...
Automatically shut down every Wednesday at 12:30 PM. • Automatically shut down every Friday at 4 PM. Note: The display will provide a warning reminder before shutting down, to allow a user to manually cancel the task. i3TOUCH EX Series - Manual...
The action of the multi-function button can be defined in the Settings menu. Note: The Task View and Function Key requires: A computer connected via USB, or the internal OPS computer. This computer needs to be the active video signal. i3TOUCH EX Series - Manual...
Clicking on the floating tools menu will activate it and show 6 options. Close i3NOTES, this will Pen, normal writing also delete all pages behaviour Eraser, erase parts of the Save/Export canvas Marker, you can write Delete, delete content of with semi-transparent current page i3TOUCH EX Series - Manual...
Page 25
This will close the whiteboard application and deletes all pages permanently. There is no option to retrieve deleted content. You will be asked if you want to save/export your notes first, before closing. Save / export The whiteboard application supports multiple save and export options (adjustable in admin settings). i3TOUCH EX Series - Manual...
Page 26
You can email the content of the whiteboard to yourself and/or others using one of the 3 available mail options. Use i3NOTES This option will use the i3-Technologies mail service. Enter the email address to whom you want to send the PDF to. You can enter multiple email addressess separated by a space (" "). Use Microsoft Exchange This option uses your Outlook account to send the mail.
Page 27
Required: your network firewall will need to allow peer-to-peer connections. Use cloud The cloud option will export the PDF to the i3-Technologies cloud server and make it publicly available to download for everyone that scans the QR code. After 2 hours the PDF will automatically be removed from our server.
Page 28
This allows for the quickest note-taking experience: open whiteboard, write with stylus, erase with finger. Changing the drawing tool, or its thickness or color will modify the finger-touch behavior, until the white- board is closed and reopened again. The whiteboard canvas supports multi-touch writing. i3TOUCH EX Series - Manual...
At the bottom there will be 2 buttons, to cancel the cropping and to submit and send it to the whiteboard application. i3TOUCH EX Series - Manual...
Page 30
Finger writing / drawing At start-up of the annotate application, touching the canvas with a finger will activate the eraser function on default. This allows for the quickest note-taking experience: write with stylus, erase with finger. i3TOUCH EX Series - Manual...
��� and connect to the i3TOUCH EX with i3ALLSYNC transmitter software Open the transmitting client i3ALLSYNC application on your device, and follow the instruction on-screen to insert the i3TOUCH EX credentials and cast your screen content. i3TOUCH EX Series - Manual...
Page 32
Available only in the CLOSED Meeting Mode. Press this button to display a list with previews of the connected users that are standby to share their screen content. Press the play button on the preview to display the screen content. i3TOUCH EX Series - Manual...
Page 33
NOTE: Touch functionality only works via the i3ALLSYNC Transmitting clients on Windows and MacOS. Use the i3ALLSYNC HDMI transmitter (optional accessory) i3-Technologies also offers the i3ALLSYNC HDMI Transmitter (purchased separately) for meeting attendees (guests) that can’t or won’t install the client software. Once the i3ALLSYNC HDMI Transmitter is paired only once with the display, you only need to plug in the HDMI and USB cable and press the button to immediately share the HDMI content on-screen.
Check whether other electronic equipment or power tools are placed around the image dithering machine. No color, color is Adjust chromatic and brightness or contrast in menu. weak, or image is Check whether signal wire is well connected. weak i3TOUCH EX Series - Manual...
NOTE The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. i3TOUCH EX Series - Manual...
Need help?
Do you have a question about the i3TOUCH EX Series and is the answer not in the manual?
Questions and answers