Subscribe to Our Youtube Channel
Related Manuals for Almeco JetBlack Safety Cleaning Booth
Summary of Contents for Almeco JetBlack Safety Cleaning Booth
- Page 1 DRYING SOLUTIONS www.almeco.eu L ACK AFET Y LEANING OOTH Including Indoor/Outdoor versions Installation, Operation and Maintenance instructions...
-
Page 2: Table Of Contents
Installation procedures General operation System rating 10. JetBlack Safety Cleaning Station information 11. Wiring diagrams 12. LEV data 13. Warranty information 14. WEEE recycling & materials disposal ALMECO nv Air and water technologies Royennestraat 51, B-7700 Moeskroen info@axongroup.com - www.almeco.eu... -
Page 3: Important Information
DIRECT THE AIR AT BROKEN SKIN! DO NOT USE IN ATEX ZONES OR NEAR EXPLOSIVE SUBSTANCES! The JetBlack Safety Cleaning Booth was created to be mobile or remain at a fixed location for the life of the unit. In addition, the Cleaning Booth is all electric and uses no compressed air –... - Page 4 Internal Features (for both Internal and External models) PIR Sensor LED Light PPE Label LEV Gauge Cleaning Station Nozzle Assembly On/Off Switch Emergency stop Hose Foot Grille ALMECO nv Air and water technologies Royennestraat 51, B-7700 Moeskroen info@axongroup.com - www.almeco.eu...
-
Page 5: Outline Drawings
L ACK AFET Y LEANING OOTH 4. OUTLINE DRAWINGS Indoor version Outdoor version ALMECO nv Air and water technologies Royennestraat 51, B-7700 Moeskroen info@axongroup.com - www.almeco.eu... -
Page 6: Equipment Arrival/Inspection
LEANING OOTH 5. EQUIPMENT ARRIVAL/INSPECTION If there are any shortages, discrepancies or damage to your product upon delivery, please immediately contact Almeco. 6. SAFETY INFORMATION • Installation, commissioning and electrical installation should only be performed by trained service personnel and in accordance with the latest IEE regulations. -
Page 7: Installation Procedures
EXTRACTION SYSTEM SHOULD BE RUNNING BEFORE THE CLEANING STATION IS OPERATED. • The interior light and extractor (if supplied) is operated by a PIR & is factory set. ALMECO nv Air and water technologies Royennestraat 51, B-7700 Moeskroen info@axongroup.com - www.almeco.eu... -
Page 8: General Operation
The Cleaning Station fitted has a thermal shut-off device for safety purposes. Prolonged use may cause the unit to shut off. In this case, switch the unit off and wait for a few minutes before re-using. Spares filters for the Cleaning Station and the extractor can be purchased through Almeco. Replacement filters information is as follows: •... -
Page 9: System Rating
Never use high pressure cleaners in maintenance operations. • Filters – We recommend that the filter is inspected at least once a month, and replaced after a maximum of 3 months. Almeco’s part number for this filter is B3.003.054. To check the filter: •... - Page 10 Flexible hose plug filter with connector Cleaning Station Spares List If you require any spare parts for your Cleaning Station unit, please refer to the following Almeco Part Numbers: Part number Part description B3.003.049 Moulded Cleaning Station full nozzle assembly (includes dip-moulded nozzle) B3.003.053...
-
Page 11: Wiring Diagrams
L ACK AFET Y LEANING OOTH 11. WIRING DIAGRAMS ALMECO nv Air and water technologies Royennestraat 51, B-7700 Moeskroen info@axongroup.com - www.almeco.eu... - Page 12 L ACK AFET Y LEANING OOTH ALMECO nv Air and water technologies Royennestraat 51, B-7700 Moeskroen info@axongroup.com - www.almeco.eu...
-
Page 13: Lev Data
4) On exiting the Booth, the light & extractor should overrun for 1 minute. Once the light & extractor have switched off, and a further minute has passed, the extractor will self-agitate to clean the large cannister filter. The agitate sequence should also last 1 minute. ALMECO nv Air and water technologies Royennestraat 51, B-7700 Moeskroen info@axongroup.com - www.almeco.eu... - Page 14 & damage & lectores, collection damage condition damage & bags condition CLEANING STATION FILTER CHANGE CLEANING STATION FILTER CHANGE ALMECO nv Air and water technologies Royennestraat 51, B-7700 Moeskroen info@axongroup.com - www.almeco.eu...
- Page 15 CLEANING STATION FILTER CHANGE CLEANING STATION FILTER CHANGE IT’S NOW TIME TO BOOK AN LEV RE-TEST & CERTIFICATION, THIS IS LEGALLY REQUIRED BEFORE 14 MONTHS CLEANING STATION FILTER CHANGE ALMECO nv Air and water technologies Royennestraat 51, B-7700 Moeskroen info@axongroup.com - www.almeco.eu...
-
Page 16: Warranty Information
Parts replaced under the warranty become the property of Almeco. • At no time will Almeco be liable for any of the costs to the buyer for labour, transportation or down-time resulting from defective equipment furnished by Almeco. What the warranty does not cover •...
Need help?
Do you have a question about the JetBlack Safety Cleaning Booth and is the answer not in the manual?
Questions and answers