Table of Contents
Advertisement
Transport and frost protection
Empty the condensate container and
residual water from the dryer:
Select any program using the
1.
program selector.
Press the Start button.
2.
Wait for 5 minutes.
3.
The condensate is drained.
Note:
Empty the condensate container
4.
again.
Switch off the dryer.
5.
Caution!
Any residual water may leak out and
cause material damage.
Transport the dryer in an upright
position.
Caution!
The dryer contains coolant and may be
damaged.
Allow the dryer to rest for two hours
before initial use.
Installation and connection
en
19
Advertisement
Table of Contents
