Table of Contents
Advertisement
Remove the screws from the dryer
2.
and then remove the dryer door.
Use a T20 (Torx) screwdriver
Note:
only. Do not use any other tools to
change the side on which the door is
hinged.
Carefully place the dryer door onto a
3.
flat surface, and place a hand towel
or other such item between the door
and the surface to avoid scratching
or damaging the door.
Now remove the screws from the
4.
door hinge, and remove the hinge
from the dryer door.
Installation and connection
Remove the screws from the door
5.
handle on the dryer door and
remove the door handle.
Unlock the door ring.
6.
Now lift the dryer door from the door
7.
ring. Rotate the dryer door and place
it back onto the door ring in the
corresponding place.
Lock the door ring back in place.
8.
en
17
Advertisement
Table of Contents
