Advertisement
STEP 18. Once Channelled Center Column is in its
proper location in the upper Cross Support, secure with
the longest of the three remaining knobs by threading the
threads of the knob in the hole in the rear of the cross
support. Tighten to secure. See FIG 18.
9
STEP 19. This step involves adding the Adjustable
Center Column (12) down into the Channelled Center
Column (4). See FIG 19. To secure into place, thread one
of the remaining two shorter knobs into the hole found on
the rear of the Channelled Center Column. See FIG 19b.
12
Rear view of
Channelled Center
Column where knob
is to be threaded.
Martin/F. Weber Co.
4444 Lawton St., Detroit, MI 48208 USA
Tel:(313)895-0700 • Fax:(313)895-0709
E-mail:custservmud@gmail.com
www.MartinUniversalDesign.com • www.weberart.com
Created NOV07RPI
4
7
FIG 18
FIG 19
4
FIG 19b
4
STEP 20. Final step involved in the assembly of your
New 92-3010 Easel.
Attach the Upper Canvas Support (13) to the Adjustable
Center Column (12) by sliding the grooves of the canvas
support down into the channels of the Adjustable Center
Column. Do this from the top end of the Adjustable
Center Column. Secure with remain knob. tighten to
secure at desired position. See FIG 20
ADJ 1. Adjusting Height Material Tray.
Insert finger in locking loop pin below Material Tray and
pull outward. This will cause the material tray support to
release from the metal ratchet column allowing you to
raise or lower the material tray and center column.
PLEASE NOTE: Be careful when raising the
material tray, that you are aware that the top of the
column will not interfere with ceiling or any other
object in rooms that have low ceilings.
If you have difficulty assembling your 92-3010 Weber Monster
Amalfi Studio Easel or need customer service assistance.
Please call: Martin Universal Design, Inc. Customer Service Hot
Line at 1-313-895-0700. If you need additional parts,
it is not necessary to contact your dealer, our Customer Service
Rep. will forward them to you immediately.
• Made in China
12
13
IMPORTANT
FIG 20
Page 6
Advertisement
