How To Use - Panasonic EH‑XR10 Operating Instructions Manual

• If there is noise from the radio or other sources while
using or charging the appliance, move to a different
location to use the appliance.

How to use

Use the appliance on clean skin after thoroughly
removing makeup and washing your face.
• A tone will be triggered after the POWER/SELECT
switch is pressed or the sensor operates.
• Warming may fail when the ambient temperature is below
15 °C.
1
1
Press the switch and select a mode.
• Each press switches to the next mode. The selected
mode fl ashes in blue.
• Select the mode appropriate to the desired
application. (See page 11.)
RF/
Ultrasonic
• The appliance starts in RF/Ultrasonic mode each time
the power is turned on.
• The appliance will not turn on when the AC adaptor is
connected.
• Make sure to use the appliance with the frame attached.
EH-XR10_HK.indb 13
RF OFF
2
2
Press the switch and select an RF
warmth level to start the preheating process.
• Each press switches to the next level. (The selected
mode fl ashes in blue.)
• The ultrasonic probe increases in temperature as
the RF warmth level is increased.
LOW
Memory function
The previously selected RF warmth level is stored in
memory so that the appliance can be used with the
same setting.
This memory function will reset when the appliance has
not been used for a long period of time or when the
battery has ran out.
MED HIGH
13
2020/01/24 18:17:47