Broadview OFFICESUITE SIMPLICITY Manual
Setting up and connecting an additional phone to base station
Hide thumbs
Also See for OFFICESUITE SIMPLICITY:
- Setting up (32 pages) ,
- Manual (36 pages) ,
- Quick start manual (4 pages)
Related Manuals for Broadview OFFICESUITE SIMPLICITY
Summary of Contents for Broadview OFFICESUITE SIMPLICITY
- Page 1 SETTING UP AND CONNECTING AN ADDITIONAL PHONE TO AN OFFICESUITE SIMPLICITY™ BASE STATION For support: www.broadviewnet.com/support Or call: 1-800-221-4625...
- Page 2 Set up the phone Insert the included batteries into the phone and slide the battery cover into place. Should you need to replace the batteries, use only NiMH rechargeable batteries. Optionally, attach the belt clip to the phone. Connect the power adaptor to the phone charging cradle and then to a wall outlet no more than 150 feet from the base station.
- Page 3 Connect the phone to the base If a phone is not connected with a base, it will display “Unregistered” on the home screen when the phone is idle. Press the “OK” button on the phone to get to the “Select Base” screen. Use the up/down navigation keys on the phone to select BS1 (or BS2 if you are connecting this phone to a second base station) and press the “Select”...
- Page 4 For support: www.broadviewnet.com/support Or call: 1-800-221-4625...