Matco Tools MAXTPMS 2.0 User Manual page 47

Table of Contents

Advertisement

The Lithium-Ion battery elements must be
neutralized to be made unusable. The
neutralization process must be performed
under
strict
safety
recommended that you return the tool to us.
We will extract the battery and give it to a
specialized recycler.
Do not dispose of Lithium-Ion batteries
with your general waste.
The Lithium-Ion battery is not suitable for
children under 14 years. Keep all Lithium-Ion
batteries out of the reach of children
To prevent leakage or other hazards, do not
store batteries above 60°C (140°F). Never
leave the battery inside a car (for example)
where the temperature could be very high or in
a place where temperatures could exceed
60°C (140°F). Store the battery in a dry place
to avoid contact with liquid, whatever the type.
Only store the battery on a nonflammable
surface, heat resistant, non conductive and
away from all flammable materials or sources.
Always store the battery out of the reach of
children.
A Lithium-Ion battery should be stored with a
minimum charge of 30%. If you store it
completely discharged, it will quickly become
unusable.
Failure to follow these safety precautions may
cause serious personal injury and damage to
property. You may even cause a fire!
The Matco Tools Company disclaims any
responsibility for damage sustained in the
event of non compliance with these safety
instructions.
Using a Lithium-Ion battery has a high risk of
fire and can cause serious damage to property
and persons. The user agrees to accept the
risk and responsibility.
The Matco Tools Company is not able to
monitor the proper use of the battery with each
customer (charge, discharge, storage etc.). It
cannot be held responsible for any damage to
persons or property.
UM-MDMAX-MA2-01
conditions.
It
is
User manual MATCO TOOLS MAXTPMS 2.0 Page 45/47
MATCO TOOLS MAXTPMS 2.0 - User Guide
6. FCC STATEMENTS
Federal Communication Commission
Interference Statement
This equipment has been tested and found to
comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These
limits
are
reasonable
protection
interference in a residential installation. This
equipment generates, uses and can radiate
radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio
communications.
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the user
is encouraged to try to correct the interference
by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase
the
equipment and receiver.
- Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
- Consult the dealer or an experienced
radio/TV technician for help.
FCC Caution: Any changes or modifications
not
expressly
responsible for compliance could void the
user's authority to operate this equipment.
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference
that
operation.
designed
to
provide
against
harmful
However,
there
separation
between
approved
by
the
may
cause
undesired
is
no
the
party

Hide quick links:

Advertisement

Table of Contents
loading

Related Products for Matco Tools MAXTPMS 2.0

Table of Contents