iRest SL-D501 Operation Instructions

Cleaning and maintenance
·You should take out the plug after you use, let it cool completely then
start to clean it.
·Please use wet cloth clean the dirt on the product after you use it.
·Please don't use the corrosive cleaning fluid, benzene or diluents to
clean the product.
·Avoid to trouble, please don't use wet cloth to clean the control
panel, you can only use dry cloth to clean it.
·If you don't use it for a long time, please clean it and put in carton,
and put in a ventilated and dry place, in case the product get damp
and affect the performance of the product.
Trouble shooting
This chapter summarizes the most common problems encountered in
the use of this product. If you can't solve the problem with the
following information, please consult with the maintenance center or
customer service center authorized by your district.
If you encounter the other questions didn't mention as the list, please
try as below steps:
1. Turn off the machine, take out the power plug.
2. Keep the products in off state 60 minutes.
3. Plug the power plug into the power socket again and start the
machine.
Problem Possible causes
The power plug is out or Plug the power plug in the
adaptor DC end is not plug power socket, or insert the
in. adaptor DC end to the
product, and check the
product voltage is it well
matched with local voltage.
The product After 10 minutes massage, If you want to massage again,
can't work the product switched to press the "on/off" button
standby mode automatically. to start.
You continuous use the
You must take out the plug
product for 40 minutes,
and cool for 60 minutes if
and the overheat protection
you want to reuse it.
device cut off the power.
Take out the power plug,
Overload on the product
(Somebody stand on the move out the weights (if the
weights still on the products),
products or with weights on
plug in the power plug again
the product)
and start the machine.
The warm function is on Turn off the warm function
The product
Take out the power plug and
get heat You continuous use the
let it cool, take out the power
product for 40 minutes.
plug every time after you
use it.
It is normal noise, not mean
With noise The problem caused by
the product has function
come out the mechanical structure.
problem.
Product operation sketches
Kneading massage on neck, shoulder and back
Product specification
Model: SL-D501
Name: Massage Belt
Rated voltage: 12V
Rated power: 25W
Rated working time: 10 minutes
Safety structure:
Solution
※Products refer to the actual product, without prior notice.
U SHOULDER HUG
Stretch Your Neck And Shoulder
SL-D501
SAVE THESE INSTRUCTIONS
Operation Instructions