Subscribe to Our Youtube Channel
Related Manuals for iRest SL-A33-5
Summary of Contents for iRest SL-A33-5
- Page 1 SL-A33-5 FULL BODY AIR-MASSAGE CHAIR OPERATION INSTRUCTIONS SAVE THESE INSTRUCTIONS...
-
Page 2: Table Of Contents
Thanks for purchasing this product. Please read this manual instruction carefully in order to know how to use this product correctly before operation. Please pay more attention to some important safety warning and keep this manual book properly for future use. Note: Our Company reserves the right to revise the design and description of this product without any further notice. -
Page 3: Safety And Maintenance
Safety and maintenance Safety and maintenance 1.IMPORTANT SAFETY WARNING. Don t make water go inside this product to avoid electric shock or cause damage to this product. Don t damage the wires or change the circuit of this product. Don t allow children to touch moveable part of this product. Don t use wet cloth to clean the electric parts such as switch and plug. -
Page 4: Name And Function Of Components
Name and function of components Function Functions This Product is designed with a set of smart 3D mechanical hands, which can move up and down, stretching back and forth, four-wheel driven with muted design. The shoulder part is designed with automatic detection and micro adjustment function;... -
Page 5: Method Of Usage
Method of usage Method of usage 1.Switch power supply on FUSE ON/OFF Diagram of plug in Diagram of the switch position of power supply 2. Start massage Press red power button for a short time ,backrest and calf position will lie down automatically,start massage ;Press red power button for a long time ,backrest and calf position will not lie down ,start massage. - Page 6 Method of usage Method of usage Back Intensity Setting Timing set description Buttons description display Buttons Back weaken button: press this button, weaken the Rated time is 20 minutes. Max working time is 40 minutes. Every time press on TIME timing set button add to 5 more minutes.
- Page 7 Method of usage Method of usage 3.The angle of back rest and calf rest Air pressure massage description display description display Buttons Buttons Arms: press this button, the arm air pressure and upper arm air Auto Auto lay down mode: with 4 auto lay down modes, when pressure massage function on,arm air pressure strength has 3 press the button, turn into one mode.
-
Page 8: Figure
Method of usage Method of usage Switch power off 6. Amrest installation and notice. Figure (switch power off) Check if the inner supporting gear are well fixed onto related seat frame position. (Figure 1) Pull the zip on the lower edge of the armrest. Open the big and small cover outside the armrest(shown as figure 2) FUSE ON/OFF... -
Page 9: Figure 2) ( Figure
Method of usage Method of usage Gently hold the armrest side.When revolve the shaft, firstly put into cage ring, Be careful don't put stress on the Be careful don't put stress inwardly then put into big washer and wrest the locknut by specialized tools. (Figure 6). two sides of armrest in order to on upper arm airbag support board Thread the socket head cap screws into upper tightening cap (Figure 7), then... - Page 10 Method of usage Method of usage Screw the screws in to the hole which got in step 1 and tighten it, take care the Prepare two screws which tighten on two sides (figure 9) direction, should be screw it from right to left. (Figure 3) Screw the two screws on two sides make it tighten, finish the installation( figure 10) Prepare the cylindrical fixed pipe.(Figure 4) ( Figure 9)
-
Page 11: Product Specification
Method of usage Product specification 9.floor Protection Model: SL-A33 Description: Full Body Air-massage Chair Put the heavy massage chairs on the wood floor for a longtime may damage the Configure: 05 floor, so please place a carpet or other object to avoid this damage. Rated Voltage: 110-120V~ 60Hz 220-240V~ 50Hz 60Hz Caution: Do not move the chairs with its wheels on wood floor, rough ground or in a...
Need help?
Do you have a question about the SL-A33-5 and is the answer not in the manual?
Questions and answers