Advertisement
User Manual
Introduction
Thank you for purchasing the Lindy 50m Cat.6 4x4 HDMI & IR Matrix Extender This product has been
designed to provide trouble free, reliable operation. It benefits from both a LINDY 2-year warranty and free
lifetime technical support. To ensure correct use, please read this manual carefully and retain it for future
reference.
The Lindy HDMI & IR Cat.6 Matrix Extender is a simple to use solution that allows users to extend four
independent HDMI signals up to 50m and then distribute those signals to four remote displays using low
cost Cat.6 U/UTP cable (not included). Each of the 4 outputs are also simultaneously mirrored to local
HDMI output ports, perfect for monitoring outputs or for the creation of a secondary local zone.
Package Contents
▪
50m Cat.6 4x4 HDMI Matrix Extender
▪
4 x HDMI & IR Cat.6 Receivers
▪
12V DC 2.5A Multi County PSU (UK, EU, US & AUS), DC round plug: 5.5mm/2.1mm
▪
4 x IR Emitter with 3.5mm connector, 1m
▪
5 x IR Receiver with 3.5mm connector, 1m
▪
4 x IR Remote Control (with CR2025 battery)
▪
RS-232 9 Pin M/F Cable, 1m
▪
Mounting Ears & Screws
▪
This Manual
RS-232 Command List
Baudrate：115200
Data width：8bit
Parity: none
Stop: 1bit
Port switch command package length is 18byte:
[0x50+0x56+0x54+0x02+0x03+inputport(1~4)+0x00+outputport(1~4)+0x00+0x00+0x00+0x00+0x00+0x
00+0x00+0x00+0x00+checksum]
All you need to change is just "input port", "output port", "checksum"
Checksum=(0x50+0x56+0x54+0x02+0x03+inputport(1~4)+0x00+outputport(1~4)+0x00+0x00+0x00+0x0
0+0x00+0x00+0x00+0x00+0x00)
For example: Set output 1 form input 2 command:
50 56 54 02 03 02 00 01 00 00 00 00 00 00 00 00 00 02
Port switch query package length is 18byte:
This is a query command which means you must send query package and then receive an answer.
For example: Query output A input port (1~4)
Send package: 50 56 54 02 01 01 00 00 00 00 00 00 00 00 00 00 00 FE
Receive package: 50 56 54 02 01 01 00 02 00 00 00 00 00 00 00 00 00 00
The red 01 mean the output port number, it should be 1~4.
The blue 02 mean the input port number, it should be 1~4.
EDID set command package length is 18byte:
[0x50+0x56+0x54+0x03+0x02+EDIDindex(1~15)+0xF0+inputport(1~4)+0x00+0x00+0x00+0x00+0x00+0
x00+0x00+0x00+0x00+checksum]
[0x50+0x56+0x54+0x03+0x01+EDIDindex(1~15)+0x00+0x00+0x00+0x00+0x00+0x00+0x00+0x00+0x0
0+0x00+checksum]
Means: set EDID mode to all input port
English
Advertisement
