Liberty Safe Safe Power Outlet Kit Installation And Operation Manual page 4

Remove drill bit from hole saw and replace
6
with included guide rod.
Using the hole saw as a stencil, use a mark-
8
er to mark the fabric around the hole saw.
Carefully pull the cut fabric off and discard.
{
10
From inside the safe, insert the guide rod
7
through the hole and into the hole saw
centering guide.
Use a utility knife to carefully cut the fabric
9
where it is marked around the hole.
Reinsert hole saw to make sure the hole
{
11
saw teeth will not catch the fabric around
the hole or damage to fabric may occur.
Align the hole saw and begin cutting.