Led Indicators; Troubleshooting; Technical Data - Schweizer MULTILIGHT Pro Instructions For Use Manual

LED indicators

D
Indicator status description (only for rechargeable battery-operated models)
1. Flashing green light
2. Solid green light
3. Flashing red light and
light turns off every 60 seconds
Indicator light flashes / glows solid

Troubleshooting

Problem
1. MULTILIGHT Pro can't be switched
on.
2. Light goes off temporarily
(every 60 seconds).
3. Lamp switches off during use and
LED indicator on control panel
flashes red quickly.
4. Lamp arm position cannot be
changed.
10
–> Battery is charging
–> Battery is fully charged
–> Battery is empty, charging required
Light goes off temporarily
(every 60 seconds)
Solution
Connect the lamp to the power supply
before using it.
Plug in barrel connector into lamp foot.
Then plug power adapter into wall outlet
–> p. 8.
Rechargeable battery is almost empty.
Charge battery –> p. 10
Temperature warning active. Switch off
and disconnect the device from the mains
supply. Leave it to cool, then switch on as
usual –> pp. 8 /10
Lift the levers to unlock the joints before
positioning the lamp arm. Push levers
down to lock the lamp arm in place –> p. 9.

Technical data

MULTILIGHT Pro Table mains operated
Power supply: 100-240 V
Power adapter 12 V – 2000 mA
MULTILIGHT Pro Table Akku
Rechargeable battery
MULTILIGHT Pro Table Akku 3in1
Rechargeable battery, 3 light temperatures
Lithium-ion battery: 7.4 V – 2600 mA
Operating time: approx. 4 hours
Charging time: approx. 3 hours
Power supply: 100-240 V
Power adapter 12 V – 2000 mA
MULTILIGHT Pro Table XL
Mains operated, extended arm
MULTILIGHT Pro Table XL Clamp
Mains operated, extended arm, clamp
Power supply: 100-240 V
Power adapter 12 V – 2000 mA
MULTILIGHT Pro Floor 3in1
Mains operated, 3 light temperatures
MULTILIGHT Pro Floor
Mains operated
Power supply: 100-240 V
Power adapter 12 V – 2000 mA
11