Safety And Maintenance, Battery Safety Instructions - Schweizer MULTILIGHT Pro Instructions For Use Manual

Congratulations!
Thank you for choosing this
innovative lamp from SCHWEIZER.
Made in Germany, this quality product
has been manufactured according
to currently valid standards and
regulations.
Please read these instructions
carefully before using the lamp for
the first time and observe our safety,
cleaning, and care information.
4
General information
The MULTILIGHT Pro lamp range
offers 7 models to choose from:
5 table lamps and 2 floor lamps. All
lamps are available in a choice of
3 light temperatures – warm white,
neutral white, or cool white. Only the
3 in1 models feature all three light
temperatures.
Power supply
All MULTILIGHT Pro lamps require
mains power. The Akku models use
a built-in lithium-ion battery that is
recharged via the power adapter.
The LED light-emitting diodes are
subject to the most stringent selection
criteria. They have a lifespan of up to
50,000 hours.
Cleaning and care
Ensure the lamp has been disconnected
from the mains supply. Clean the plastic
surface with a damp (water or mild
detergent) soft and clean cloth. Do not
use alcohol, solvents, abrasives or
aerosol sprays.
Safety and maintenance
Do not attempt to repair the
MULTILIGHT Pro lamp yourself or
to open the housing. This product
contains no user serviceable parts.
Any unauthorised attempt to service
or replace internal components will
render the warranty null and void.
Do not remove the built-in battery.
It cannot be replaced by the user.
Keep your MULTILIGHT Pro lamp
away from wet areas, rain and other
sources of moisture.
Do not rinse your MULTILIGHT Pro
lamp with water.
Charge/operate and store your
MULTILIGHT Pro lamp at an ambient
temperature of 10-35 °C.
Only use the supplied charger/power
adapter to charge the lamp. The
round barrel connector of the charger/
power adapter fits easily into the
socket of your MULTILIGHT Pro lamp.
Battery safety instructions
We place our batteries on the market in
line with legal requirements. Please read
the points below on the safe disposal of
our batteries:
The built-in rechargeable battery
inside the lamp cannot be removed.
To prevent harmful effects to the
environment and health, it is therefore
necessary to dispose of the entire
lamp at recycling centres or return it
to the point of sale.
Returning batteries is required by law
and free of charge for you.
Valuable raw materials such as
zinc, iron, nickel and so on can
be recovered by recycling used
rechargeable batteries.
The "crossed out wheelie bin" symbol
on products indicates that it is illegal
to dispose them along with normal
refuse.
How to properly
charge your battery:
Charge the battery inside the lamp
immediately after it is drained
(approx. 3-hour charging time).
Avoid deep discharging of the
rechargeable battery as it could
get damaged otherwise.
Interim charging does not affect
the battery service life.
5