To Configure Your Server As A Slave Connect Server - CAE LearningSpace Setup Manual

CAE LearningSpace

2.2 To configure your server as a SLAVE Connect Server:

2.2.1 Follow the above instructions in 2.1 until the Initial Setup screen becomes editable:
2.2.2 To configure a slave Connect Server, enter the master Connect Server's
hostname or IP address in the Master Connect Server Address field and all
other required information.
IMPORTANT: All fields marked with an asterisk (*) are required.
2.2.3
When you are finished with editing, click Save Settings.
2.2.4 Once you have configured the SLAVE Connect Server, click the Continue to
LearningSpace button or enter learning.space in the browser.
905K463452 (267r)
Master Connect Server Address field
Initial Setup screen with editable settings
9