Dometic PJS118 Operating Manual page 15

PJS118
6.7 Starting Vehicles
The jump starter can be used to start vehicles with 12V batteries with up to 6L petrol or 4L diesel
engines.
7
No. in
fig. 7
1
2
3
4
I
NOTE
Ensure that the jump starter is no less than 50% charged.
If it is below 50%, it may not be able to jump start a vehicle.
➤ Open the socket (fig. 7 1).
➤ Connect the plug (fig. 7 3) of the intelligent battery clamp to the socket (fig. 7 1).
➤ Switch On the device, following the instructions given in chapter "Starting and switching
on/off" on page 10.
A
NOTICE! MATERIAL DAMAGE.
• Once the vehicle is started, disconnect the clamps (fig. 7 4) from the vehicle's bat-
tery within 30 seconds (negative terminal on the vehicle's battery first).
• Do not connect the red and black clams together.
EN
Description
Socket for intelligent battery clamp
Intelligent battery clamp
Plug for intelligent battery clamp
Battery clamps (red/black)
Using the appliance
15