Page 1
USER USER MANUAL MANUAL SOLAR LED BATTEN LIGHT Version 05.2020...
Page 2
20CM Fix the two metal clips into posi•on and a•ach to surface. It is recommended that each clip is posi•oned approximately 20CM from each end of the Ba•en Light. Cau•on : Ensure correct anchor sleeves are used for surface material. Plese see package contents before installa•on. Using a screw driver, secure each clip onto the Ba•en Insert Tensioning Bolt and a•ach the Light with the Tensioning bolt.
Page 3
M6*16 Screws . This is to fix to solar panel M6*16 Screws . Can fix in different holes for different moun•ng angle. M8*16 Screws . NOTICE Please note the brackets for le! and right sides are different, make sure it is well-assembled properly.