Advertisement
Using the Wavecom Modem Kit
Component Identification, Figure 1
#
Description
1
RS232 cable,
terminated by RJ11
connectors
(available by separate order,
p/n RS232-CB1)
2
15 pin male adapter,
MJ10-22-CS29
3
15-pin RS232 port
4
Power supply connector
5
Power supply cable
6
End of power supply cable
7
SIM card drawer
8
GSM antenna
Mounting the Modem
1. Insert the brackets shown in
Figure 3.
2. Screw the modem to a
flat surface.
2
Notes
This cable is not part of the kit. It is used to download programs to an OPLC.
The 9-pin female connector supplied with the cable is MJ10-22-CS25. Before
you connect the OPLC to the GSM modem, replace this connector with the 15-
pin male adapter that is supplied with the kit, MJ10-22-CS29.
Located on modem.
Located on modem
Includes fuse.
Red wire—positive, black wire—negative.
To open the SIM card drawer, press the button shown in Figure 2 with a
pointed object. Note that the drawer should be open only when the
modem is turned OFF.
LED indicator
SIM card
SIM card holder
button
Figure 2
antenna port
Side View
mounting brackets
Figure 3
Mounting
Unitronics Industrial Automation Systems
2/02
Slide the brackets
into the slot on the
back of the modem.
Advertisement
