Advertisement
Quick Links
The GSM-14J Modem Kit: Siemens TC65
This kit enables your SMS-enabled OPLC to communicate via cellular networks.
The kit, GSM-14J Modem Kit, contains a Siemens TC65 GSM modem and related hardware.
The modem can communicate via GSM, GPRS + TCP/IP at 850/900/1800/1900 MHz.
Connection
The figure below shows you how to assemble the different elements of the Siemens TC65 GSM
modem, and how to connect the modem to an OPLC.
Component Identification
#
Description
1
Communication cable,
controller to modem
2
9 pin male adapter
p/n MJ10-22-CS76
3
9-pin RS232 port
4
LED
5
Power supply cable
6
End of power supply cable
7
Sim Card drawer
8
GSM antenna
9
GSM antenna connector
Unitronics
Notes
Vision, M90/91 series:
This is the programming cable for the controller.
Jazz
Jazz does not comprise an embedded communication port. Add-
on ports are available by separate order. Use the communication
cable supplied with the Add-on port
Located on modem.
Orange wire + striped orange & white wire—positive, blue wire—
negative.
See page 2.
Located on modem
1
Advertisement
Related Manuals for Unitronics GSM-14J
Summary of Contents for Unitronics GSM-14J
- Page 1 The GSM-14J Modem Kit: Siemens TC65 This kit enables your SMS-enabled OPLC to communicate via cellular networks. The kit, GSM-14J Modem Kit, contains a Siemens TC65 GSM modem and related hardware. The modem can communicate via GSM, GPRS + TCP/IP at 850/900/1800/1900 MHz.
- Page 2 , GSM-14J Modem Kit Siemens TC65 GSM modem SIM Card Drawer To open the SIM card drawer: Turn off the power, then press the yellow button with the point of a pen or similar object. Mounting Screw the modem to a flat surface using the two holes shown to the right.
-
Page 3: Technical Specifications
The information provided is subject to change without notice. The information in this document reflects products at the date of printing. Unitronics reserves the right, subject to all applicable laws, at any time, at its sole discretion, and without notice, to discontinue or change the features, designs, materials and other specifications of its products, and to either permanently or temporarily withdraw any of the forgoing from the market.