Functions And Programming - PEDROLLO EVOLUTION Series Operating Instructions Manual

7. fuNcTIONS AND PROGRAMMING

MAIN VISuALIZATIONS:
when EVOLuTION turns on the display visualizes the following sequence:
electric pump
EVOLUTION v 1.0
After the sequence above the display appears as follows:
230v 0.0A 1.0@
Man ( ) Aut (*)
This screen allows to visualize the electrical measures detected by EVOLuTION in each mo-
ment:
• 230V= power supply voltage detected;
• 0.0A= corrent absorbed by the load connected;
• 1.0ϕ = power factor (cos-fi) of the load connected;
• Man (*)= EVOLuTION on manual mode;
• Aut (*)= EVOLuTION on automatic mode.
LOAD AcTIVATION ON MANuAL MODE:
Push the button and the display shows
push the button and check the load is disabled when the led
releasing the
On manual mode the load is activated and it by-passes all the alarms, but in case of a failure
the display flashes and the description of the alarm appears when pushing the
➞
PEDROLLO
www.pedrollo.com
button .
➞
Model
es. m/2.2
230v 0.0A 1.0@
Man (*) Aut ( )
50Hz
to activate the load,
lights up after
button.