Advertisement
RIGID FRAME
TRUCK SHELTERS
SERCO STEEL®
Installation Instructions
WARNING
S-420
GALVANIZED STEEL FRAMING
Do not install this product unless you read and
understand the Warnings and Installation
Instructions contained in this manual. Failure to
do so could result in serious injury or death.
4Front Engineered Solutions, Inc.
W183 S8253 Racine Avenue
Muskego, WI 53150
Tel: (262) 679-6200
Fax: (262) 679-6210
FORM NO:
4F-S420-4/10
Advertisement
Table of Contents
Related Manuals for Serco S-420
Summary of Contents for Serco S-420
- Page 1 4Front Engineered Solutions, Inc. W183 S8253 Racine Avenue Muskego, WI 53150 Tel: (262) 679-6200 Fax: (262) 679-6210 S-420 RIGID FRAME TRUCK SHELTERS SERCO STEEL® GALVANIZED STEEL FRAMING Installation Instructions FORM NO: 4F-S420-4/10 Do not install this product unless you read and...
- Page 2 If pre-punched holes don’t align due to Serco S-420 Rigid Frame Truck Shelters are custom dock offset, drill hole in side frame as required. built for each application. Installation procedures are the same for all Rigid Frame truck shelters regardless 5.
- Page 3 ! IMPORTANT ! SUGGESTED MOUNTING METHODS: INSTALLATION OF HEAD CURTAIN WIND (Mounting anchors not included) STRAPS OR SIDE CURTAIN RETENTION MASONARY BUILDING WALLS: STRAPS UNDER TENSION WILL RESULT IN Try to hit mortar joints. Use 1/2” or 3/8” x 3” expansion SEVERE HEAD AND SIDE CURTAIN DAMAGE.
- Page 4 THERE IS NO WARRANTY OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE. DryDock, Serco, Serco Steel, Sn apB ack, U ltra Dock Shelter, U ltra Seal, XL-90 are registered trademarks of 4Fro nt Engineered Solutions, Inc. COVERED BY PATENT # 6,170,204 AND PATENT PENDING...
Need help?
Do you have a question about the S-420 and is the answer not in the manual?
Questions and answers