General; Charging Socket - Permobil VR2 basic User Manual

VR2 basic
2.1

General

The control panel consists of a joystick and function buttons. The
charger socket is located on the front of the panel.
2.2

Charging socket

This socket may only be used for charging or locking the
wheelchair. Do not connect any type of programming cable to this
socket. Do not use the socket as a power supply for any other
electrical device. Connecting other electrical devices may damage
the control system or affect the wheelchair's EMC (electromagnetic
compatibility) performance.
NOTICE
Use only the supplied battery charger
The wheelchair's guarantee will be rendered invalid if any device other
than the battery charger supplied with the wheelchair or the lock key is
connected via the control panel charger socket.
12
Joystick panel VR2 basic
Figure 2. Charging socket