Installation - Jovision JVS-FRT-P8 User Manual

Cable
RJ45
RS485
ALARM IN1
ALARM IN2
ALARM OUT
WIEGAND OUTPUT
SERIAL PORT
DC 12V
Before you start:
1.Please make sure that the device is in good condition and all of the assembly parts are included.
2.Make sure that all related equipment is powered-off during the installation.
3.Check that the device specification agrees with the installation environment.
4.To avoid damage, ensure the power supply voltage matches your device requirements.
5.Please make sure the installation surface is strong enough to withstand three times the weight of
the device and the mounting.
6.If the installation surface is concrete, you need to insert expansion screws before you install the
device. If the installation surface is wood, you can use self-tapping screws to secure the device.
7.If the product does not function properly, please contact your dealer or the nearest service
center. Do not disassemble the device for repair or maintenance by yourself.
Note: The pictures shown in this manual is for reference only, different models may vary its shape
and structures. Please take actual product as standard.

Installation

4