Page 1
SaeboStim Pro Sensory Electrical Stimulation (SES) Accessory Kit Glove TheraCream Garment Snap Connector Arm Sleeve Saebo www.saebo.com...
Page 2
Instructions for Use: 1. The Electrode Wires provided with the SaeboStim Pro connect to the Output Ports (OUT A / OUT B) located at the top of the Stimulator. The wire connectors were designed so they will insert and connect firmly into place.
Page 3
4. Remove all jewelry and clean the skin thoroughly. Conductive Electrode Garments do not work well if any lotion, oil, or dirt is on the skin. 5. Apply the conductive TheraCream over the treatment area (arm and hand). Please be sure to cover the entire treatment area thoroughly to avoid an uncomfortable, stinging...
Page 4
8. Once the Garments are in place and the Electrode Wires are connected to the SaeboStim Pro, treatment can begin. a. Turn on the SaeboStim Pro (refer to the SaeboStim Pro instruction manual). b. Press the Channel Key (CH) once, and icon A will flash.