Introduction; Explanation Of Symbols; Intended Use - Renkforce MD50 Operating Instructions Manual

1. Introduction

Dear customer,
Thank you for purchasing this product.
This product complies with the statutory national and European requirements.
To maintain this status and to ensure safe operation, you as the user must observe these operating instructions!
These operating instructions are part of this product. They contain important notes on commissioning and
handling. Also consider this if you pass on the product to any third party. Therefore, retain these operating
instructions for reference!
If there are any technical questions, please contact:
International: www.conrad.com/contact
United Kingdom: www.conrad-electronic.co.uk/contact

2. Explanation of symbols

The symbol with an exclamation mark in a triangle is used to highlight important information in these
operating instructions. Always read this information carefully.
The arrow symbol indicates special information and advice on how to use the product.

3. Intended use

This product is designed to search for metal parts in the ground. It detects all types of metals and produces an audible
signal when metal objects/conductors are detected.
Always follow the safety information in these operating instructions. It contains important information on
how to handle the product safely. You are responsible for the safe operation of this metal detector!
For safety and approval purposes, you must not rebuild and/or modify this product. Using the product for purposes
other than those described above may damage the product. In addition, improper use can cause hazards such as
a short circuit, fire or electric shock. Read the instructions carefully and store them in a safe place. Only make this
product available to third parties together with its operating instructions.
All company and product names are trademarks of their respective owners. All rights reserved.
14