YOTRIO 10' Patio Offset Umbrella Assembly Manual

Advertisement

Quick Links

DO NOT RETURN TO RETAILER
IF YOU HAVE ANY QUESTIONS OR CONCERNS
MONDAY-FRIDAY 8:30 AM TO 5:00 PM PACIFIC STANDARD TIME / 11:30
AM TO 8:00PM EASTERN STANDARD TIME
YOTRIO CUSTOMER CARE
Warranty Coverage Requirements:
1. Copy of your Original Store Receipt.
2. Pictures of the damaged parts.
3. You must know the name of your product and any corresponding
item numbers as well as the name of the store where you purchased
the item.
4. Please gather all of this information BEFORE you call customer service.
For best results, clean frame with damp cloth and dry thoroughly. This
will help prevent mildew by removing dirt particles that may accumulate.
Do not use abrasive materials or cleaners. In order to prolong the life of
your umbrella when not in use or during inclement weather (rain, hail,
sleet, snow, wind), fire, extreme heat and freezing conditions, the
umbrella needs to be stored in a dry, sheltered place. In addition, when
not in use your umbrella needs to be stored.
Important! Please read instructions thoroughly before assembling.
Familiarize yourself with the inventory of parts and the
accompanying illiustrations to assure safe and proper
assembly.
Note: Repeated assembly can weaken the locking ability of the washers. Periodically
check all bolted connections on your furniture to make sure they are tight and
secure. Retain these instructions for future reference.
Warning: In excessively windly conditions, be sure to close umbrella to prevent the
umbrella from tipping over and possible damage.
PLEASE VISIT OUR WEBSITE AT:
www.yotrioint.com
OR TOLL FREE AT:
1-866-905-4107
CARE INSTRUCTIONS
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 10' Patio Offset Umbrella and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for YOTRIO 10' Patio Offset Umbrella

  • Page 1 OR TOLL FREE AT: 1-866-905-4107 MONDAY-FRIDAY 8:30 AM TO 5:00 PM PACIFIC STANDARD TIME / 11:30 AM TO 8:00PM EASTERN STANDARD TIME YOTRIO CUSTOMER CARE Warranty Coverage Requirements: 1. Copy of your Original Store Receipt. 2. Pictures of the damaged parts.
  • Page 2 10′ Patio Offset Umbrella Assembly Instructions PARTS LIST PARTS DESCRIPTION NAME Lower Bracket 1 PC 1 PC Upper Bracket 1 PC Base Tube 4 PCS M8x20mm Bolts 4 PCS Flat Washer 1 PC Screw-in Knob 1 PC Tube Rim 1 PC Metal Clip 1 PC Sunshade...
  • Page 3 10′ Patio Offset Umbrella Assembly Instructions Step 01: Place Upper Bracket (B) onto Lower Bracket (A) as shown. Step 02: Line up the bolt holes on the Base Tube (C) with the corresponding bolt holes on the two brackets. Screw the M8x20 Bolts (D) with the Washers (E) into BaseTube (C).
  • Page 4 10′ Patio Offset Umbrella Assembly Instructions Step 04: Insert the 4 Side Pieces On Base (K) into the slot of the Plastic Angle Plate (J) as shown. Step 05: Pour the sand into the Sand Bag (M) through the velcro openings. Each sand bag holds 88 lbs of sand.
  • Page 5 10′ Patio Offset Umbrella Assembly Instructions Step 07: Place Fabric Cover (L) over base and hook securely as shown. Step 08: 1) Overlap the Metal Clip (H) and Tube Rim (G) on the Base Tube. 2) Insert Screw-in Knob (F) through the hole of the Metal Clip (H) and into the Base Tube as shown.
  • Page 6 10′ Patio Offset Umbrella Assembly Instructions Step 10: 1) Open the Spanner by pulling up on the Spanner Lever. 2) Raise the Spanner to desired height. Step 11: 1) Close the Spanner. 2) Push the Crank upward. 3) Slide Locking Cover downward to lock the Umbrella.
  • Page 7 10′ Patio Offset Umbrella Assembly Instructions Step 13: To adjust the position: 1) Open the Spanner Lever; 2) Pull down the Spanner; 3) Close the Spanner Lever to lock the Umbrella. Step 14: Turn the Crank counter clockwise to fold the Umbrella. Step 15: Push up the Locking Cover to unlock the Umbrella, then pull Crank downward.
  • Page 8 10′ Patio Offset Umbrella Assembly Instructions Step 16: Open the Spanner Lever, then pull the Spanner down. Step 17: Close the Spanner by pushing Spanner Lever down.

Table of Contents