Programming The Automatic Baking Process - Pelgrim IF960RVS Manual

OPERATING THE OVEN

Programming the automatic baking process

8. Now, first turn the temperature knob and the function knob to '0' to
switch Off the oven completely.
9. Finally, press and hold the 'Menu' key to remove 'A' out of the
display.
▷ You can see the end of the baking time in the display at any time
by pressing and holding the 'Menu' key until the blinking bell
symbol appears. Immediately, press the 'Menu' key twice.
▷ If you want to adjust the end time, press and hold the 'Menu' key
until the blinking bell symbol appears. Then, immediately press
the 'Menu' key twice and after that the + or − key to adjust the
end time.
You can program the oven to turn on and Off automatically by setting a
duration and end time. The oven will calculate the start time and switch
Off automatically after the end of the cooking time.
Example
Current time: 17:30, the set duration of the baking process: 1 hour and
15 minutes, the set end time of the baking process: 19:45.The oven
will start the baking process at 18:30 with the preset temperature and
function and will stop at 19:45.
1. Press and hold the 'Menu' key.
▷ A blinking bell symbol appears in the display and the time is
set to 0.00.
2. Immediately, press the 'Menu' key again.
▷ The bell symbol disappears and a blinking 'A' appears in the
display. Alternately, also 'Dur' and '0.00' appear in the display.
3. Use the - key and the + key to set the baking time.
4. If the correct time has been set, press the 'Menu' key again.
▷ Alternately, 'End' and the current time appear in the display.
5. Use the + key to set the end of the baking time.
▷ The cooking symbol disappears.
6. If the correct time has been set, wait for a moment. After a few
seconds you will hear an audible signal.
▷ The current time appears in the display and 'A' stops blinking.
EN 19