Advertisement
2
TO PLAY
1.
Connect transformer to Car Maker and wall socket.
FOR FIRST USE, insert 2 wax sticks (Car Maker comes pre-loaded
2.
with 1 purple stick). After that, insert 1 wax stick for each use.
Make sure sticks are inserted point side down.
4.
Load the pre-assembled mold in the orientation shown.
3.
You will hear a click when inserted correctly.
PLEASE REVIEW INSTRUCTIONS THOROUGHLY BEFORE PLUGGING IN CAR MAKER,
OR GO TO www.HotWheels.com/CarMaker FOR ADDITIONAL ASSISTANCE.
b
a
BOTTOM VIEW
Note to Adults:
transformer for damage to the cord, housing or other parts that
may result in the risk of fire, electric shock or injury. If the
transformer is damaged, do not use it.
Children playing with electrical toys operating at 120 volts
should be supervised by an adult.
This transformer is intended to be correctly orientated in a
vertical or floor mount position. This toy must only be used with
the transformer included.
This product is not recommended for use on loose dirt or wet
surfaces.
Do not immerse in water.
If the mold won't go in,
push tabs to the top
as shown and try again.
Click!
Click!
Click!
2
Periodically examine this
Stick 3
(will protrude from top)
Stick 2
Stick 1
(pre-loaded)
Advertisement
