Download Print this page

Battery Level Indication - Nanight C3 User Manual

Dive light

Advertisement

USAGE
The drop-shaped knob controls the functionality of the light.
Loosening or tightening the screw can adjust knob friction.
SWITCH THE LIGHT ON
● Turn the knob clockwise.
● If the battery level falls below 10%, the amount of light will
automatically be reduced to optimize the battery
performance and allow the user to terminate the dive
safely.
SWITCH THE LIGHT OFF
● Turn the knob counterclockwise until it touches the
locking position, the light will go off with a delay of 2
seconds.
● Turn the knob counterclockwise past the locking position,
to ensure that the light does not come by accident, for
example during tran​
.
sport​
DIM THE LIGHT
● Turn the knob counterclockwise until it touches the
locking position, and back again within 2 seconds.
● Repeat the maneuver for further dimming.
● In this way, the light is dimmed gradually in four steps, and
back again to the highest brightness
Note that the light automatically dims down when the
battery level drops below 10%.

BATTERY LEVEL INDICATION

Turn the light on and immediately off. The light will indicate
the battery level with 1-4 flashes where 4 flashes indicates
100% charge level.

Advertisement

loading