Related Manuals for Black+Decker BDCT450
Summary of Contents for Black+Decker BDCT450
- Page 1 BDCT450 www.blackanddecker.co.nz 2000W Hot + Cold Ceramic Tower Fan Heater...
- Page 2 THIS PAGE IS INTENTIONALLY BLANK...
- Page 3 General Care and Safety Guide YOUR SAFETY IS IMPORTANT TO US. PLEASE ENSURE YOU TAKE NOTE OF THE INSTRUCTIONS AND WARNINGS OUTLINED IN THIS MANUAL. CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility.
- Page 4 General Care and Safety Guide • When the appliance has been unpacked, check it for transport damage and ensure all parts have been delivered. If parts are missing or the appliance has been damaged, contact the Customer Services Team. Do not use if there are visible signs of damage to the heater. •...
- Page 5 Components Remote Control x 1 Main Unit x 1...
- Page 6 Assembly WARNING: Heater must not be used without base installed. Base has been pre-installed by the supplier and is non-detachable. Assembling Method: Take the machine out from the packaging Carefully place the unit on a stable surface in an upright position Remove all plastic packaging from the machine.
-
Page 7: Operating Your Heater
Operating your Heater Always choose a safe location for the heater, keeping in mind the safety precautions outlined. Ensure all packaging has been removed from the unit before use. Please follow the below instructions. WARNING: In order to avoid overheating or fire, do not cover the heater. WARNING: Keep all objects at least 1 metre from the front, sides and rear of the appliance. -
Page 8: Control Panel
Overview of Control Panel and Remote CONTROL PANEL Heating Mode. Also used to increase heating temperature and timer hours. Timer Mode then touch up/down icons Oscillation/Swing to select timer hours Heating Temperature Selection Mode then touch up/down icons Power on/off to select heating temperature Cooling Mode. -
Page 9: Electronic Thermostat
Operating your Heater HEATING MODE Touch the icon to activate the low heating setting. Another touch will activate the high heating setting COOLING MODE Touch the icon to activate the low cooling setting. Another touch will activate the high cooling setting OSCILLATION / SWING MODE Touch the icon to activate the oscillation/swing function. -
Page 10: Safety Devices
Operating your Heater SAFETY DEVICES This appliance has two protection devices: • Tilt Switch - this will automatically turn the appliance off if the appliance is not in the correct operating position. • Resettable Thermal Link - this will automatically disconnect the power to the appliance at a pre-set overheat temperature. -
Page 11: Year Warranty
2 Year Warranty Thank you for purchasing this Black + Decker product. Your product is warranted against faults and manufacture when used in normal domestic use for a period of two years. In non-domestic use Black + Decker limits the voluntary warranty to three months. Black + Decker undertake to repair or replace this product at no charge if found to be defective due to a manufacturing fault during the warranty period. -
Page 12: Technical Specification
+61 (0)3 9365 5100 PO Box 574 Tel. 1300 465 324 South Morang Email info@cdbgoldair.com.au Victoria, 3752 Monday – Friday 8am-5pm PROOF OF PURCHASE To receive warranty retain receipt as proof of purchase. TECHNICAL SPECIFICATION Model: BDCT450 Supply: 220-240VAC 50Hz Wattage: 2000W...
Need help?
Do you have a question about the BDCT450 and is the answer not in the manual?
Questions and answers