Location And Function Of Parts - Sony SRP-X100 Operating Instructions Manual

Location and function of parts

Front panel
7
POWER
ON OFF
1
1 POWER button & Power Indicator
This turns the power to the unit on and off. Power
indicator lights up (green) when power is on.
2 MONO INPUT knobs
Use to adjust the mixing level on MONO INPUT
channels 1 - 6.
3 STEREO INPUT knobs
Use to adjust the mixing level on STEREO INPUT
channels 1 - 3.
The ST3 audio is output from REC OUTPUT connec-
tors.
Therefore no signal loop occurs and sounds can be
safely recorded even if the ST3 INPUT knob is still
set high during recording. (See illustration).
SRP-X100
INPUT
ST3
REC
Sound signal
OUTPUT
of
except ST3
MASTER
MONO
1 2 3 4 5
L LINE R
SIGNAL SIGNAL SIGNAL SIGNAL SIGNAL
MIN MA MIN MA MIN MA MIN MA MIN
2
Recorder
OUTPUT
When
recording
8
STEREO
6 1 2 3
L LINE R
SIGNAL SIGNAL SIGNAL SIGNAL
MA MIN MA MIN MA MIN MA MIN MA
3
4 MODE button
Selects how to use the MASTER OUTPUT. At
MONO (O) issues a monaural output, at STEREO
(o) issues a stereo output.
5 MASTER OUTPUT knob
Use this knob to adjust the output level at the MAS-
TER OUTPUT connectors.
6 SUB OUTPUT knob
Use this knob to adjust the output level at the SUB
OUTPUT connectors.
7 SIGNAL indicators
This indicator lights up when input with a signal
ranging from standard input level to more than -20dB.
8 +48V indicator
This indicator lights up when power (+48V DC) is
supplied to the MONO INPUT connectors.
9 PEAK indicator
Warns that the output signal is too high.
The INPUT knob must be adjusted when this indica-
tor keeps lighting up. (If indicator lights up only
occasionally then there is no problem.)
9
MASTER SUB
+48V PEAK
MODE
MONO
STEREO 0 0
AIDIO MIXER SRP-X100
4 5 6
5