Page 2
TILLYKKE MED DIT NYE AKVARIUM Denne vejledning vil hjælpe dig let gennem opstilling og samling af dit nye MOVE akvarium. Vi anbefaler du læser vejledningen grundigt igennem inden du går i gang... coNgRATULATIoNs wITh YoUR NEw AqUARIUM This guide will help you through installation and assembly of your new MOVE aquarium. We recommend you read the instructions carefully before you start...
Page 3
Beslaget placeres så det flugter beslaget på akvariets for- reste topramme. Brug evt. et målebånd for at placere det helt præcist. Brug det medfølgende PVC-rør til at montere og spænde The bracket is placed flush against the bracket on the aquarium’s front side.
Page 4
Monter de resterende hængselbeslag. De skal endnu ikke Afmonter omløberne på armaturet og skub dem ind over spændes fast. enderne på lysstofrørene Install the remaining hinge brackets. They must not yet be Remove the sleeves from the light unit and push them onto tightened.
Page 5
Læg armaturet ovenpå tværstiverne Skyd en bolt ind i det ene hængselbeslag. Sørg for at den Put the light unit on top of the cross members også går gennem beslaget på låget. Insert a bolt into one of the hinge brackets. Be sure that it also goes through the bracket on the lid.
Page 6
Centrer låget i forhold til akvariets endegavle. Foderdækslet kan let skilles ad for rengøring. Pres dækslets Center the lid relative to the aquarium end profiles. “ben” let sammen og skub det ud af holderen. The feeding cover can be easily disassembled for cleaning. Press the cover spindle a little and push it out of the holder.
Need help?
Do you have a question about the MOVE Series and is the answer not in the manual?
Questions and answers