Advertisement
S T E P 1
Locate the supply cable and pass it through the hole of the wall bracket.
Mark the holes in the desired position and mount the metal bracket securely in the wall
with appropriate wall plugs and screws. Make sure the electrical cable is passing freely
through the hole in the metal plate.
S T E P 2
Connecting the wires: (detail A)
A
Cut off the excess cord using a cable cutter so that minimum of 80 mm cord is left to
reconnect to the cable connector. Peel back the outer cable using a cable stripper to expose
30 mm of the blue and brown inner cables. Strip the inner cable to expose 5 mm of wire.
Connect the blue supply wire to the blue fixture wire.
Connect the green supply wire to the green fixture wire.
B
Close the cap of the terminal connector.
After connecting the wires and closing the box cap make sure that the plastic sleeve of
the connector box is placed passing through the hole in the metal bracket to assure cable
protection. (detail B)
S T E P 3
Install the light bulb.
Install the glass diffuser by screwing it onto the thread of the bulb socket.
S T E P 4
Place the lamp carefully on the wall bracket. Insert and tighten the screws to fix the
lamp to the wall bracket.
The lamp is now ready to use.
For indoor use only.
230V~ 50 Hz
Advertisement
