Advertisement
Identifying the parts
1.
Power Cord and Plug
2.
Control Connector
3.
Temperature Selector Dial
4.
Indicator Lamp
5.
Appliance Inlet
6.
Heating Shield
7.
Handle with Foot Moulding
8.
Hotplate
9.
Glass Lid
How to use
Before Operation: insert the Control Connector 2 firmly as far as it will go into
the Skillet's Appliance Inlet 5 , leaving the Temperature Indicator 3 set below the
Minimum mark - turn it anti-clockwise as far as it will go. Then insert the Power Cord Plug
1 into the mains socket. (The Electric Frypan may emit abnormal smells when used for
the first time - they are not hazardous and will disappear after a few minutes). When
cooled wipe the hotplate with a damp cloth.
Automatic Temperature Regulator on Control Connector:
1.
The thermostat can be adjusted from minimum to maximum by setting the
Temperature Selector Dial 3 from 1 to 5, to suit the type of meal to be prepared.
2.
Once the desired temperature has been reached, the thermostat's indicator lamp 4
will turn off automatically; it will light again when temperature falls below the setting
selected.
3.
Always use the Lid 9 when cooking.
Cooking Tips
•
Very little fat is necessary during cooking because of the Non-Stick pan coating - it is
better to marinade the food or lightly brush it with oil before cooking than add oil or
fat to the pan.
•
When the food is ready, reduce the Temperature Selector Dial 3 to MIN. If you wish
to keep the food warm, lower the Temperature Selector Dial to 1.
9
Electric Skillet
8
7
6
2
1
5
4
3
Advertisement
