Promaker PRO-LO300 User Manual page 2

PLEASE
INSTRUCTIONS
BEFORE OPERATING THIS TOOL
Welcome!
This product has been carefully
designed and
providing a reliable service. Please
read this handbook with attention
before operating your new tool.
It has information
getting acquaintance with the new
characteristics of this tool and getting
so an optimal performance to be
enjoyed for many years.
Please keep this handbook in a safe
place, so that the information contained
is always available. In case the tool
is transferred to another person, this
handbook should be attached.
GENERAL SECURITY RULES FOR
ALL ELECTRIC TOOLS
Warning!
Read and
instructions!
Not to follow the rules stated following
may result in electric shock, fire and/or
personal injuries.
REMIND AND
INSTRUCTIONS!
Security in the Working Place:
1. Keep your working place clean and
well lit. Dark and messy areas invite
accidents.
2. Do not use electric tools in explosive
environments such as in presence of
inflammable liquids, gases or powders.
Electric tools produce sparks that may
ignite the gases.
READ THESE
CAREFULLY
manufactured
needed
understand
KEEP THESE
3. Keep children and observers at
good distance while running electric
tools. Distractions may cause that you
lose control.
Electric Security:
for 1. Verify that voltage of energy
source matches information of the
identification plate.
for 2. Do not mishandle the cable.
Keep it out of heat sources, oils,
cutting edges and parts in motion.
Damaged
increase risk of electric shock.
3. Only use approved extension
cables apt for the tool power. The
cable should have a section of at
least 1 mm
reel, unwind it completely.
The tools has Class II double
isolation according to EN60745,
therefore, ground cable is not
needed.
all
Turn the tool off in case of:
1. Improper running or damage in plug
or cable.
2. Switch brake down.
3. Smoke or smell of burned insulator.
Personal Safety:
1. Stay alert at every moment, watch
what you are doing and use common
sense when operating an electric tool.
Do not use electric tools if you are tired
or under effects of drugs, alcohol or
medication. A moment of inattention
while operating electric tools may
result in serious personal injuries.
2. Use appropriate garment. Avoid
or tangled cables
. If the cable is in a
2
2