Promaker PRO-TP800 User Manual page 5

Warranty system px2, 1/2" 13mm, professional use
Table of Contents

Advertisement

Available languages

Available languages

to operate the power tool. Power
tools are dangerous in the hands of
untrained users.
Maintain
power
for misalignment or binding of
moving parts, breakage of parts
and any other condition that may
affect the power tool's operation.
If damaged, have the power
tool repaired before use. Many
accidents are caused by poorly
maintained power tools.
Keep cutting tools sharp and
clean. Properly maintained cutting
tools with sharp cutting edges are
less likely to bind and are easier to
control.
Use the power tool, accessories
and tool bits etc. in accordance
with these instructions, taking
into
account
conditions and the work to be
performed. Use of the power tool
for operations different from those
intended could result in a hazardous
situation.
Hold power tools by insulated
gripping
surfaces
performing an operation where
the cutting tool may contact
hidden wiring or its own cord.
Contact with a "live" wire will make
exposed metal parts of the tool "live"
and shock the operator.
Use auxiliary handles supplied
with the tool. Loss of control can
tools.
Check
the
working
when
cause personal injury.
Service
Have your power tool serviced by
a qualified repair person using
only identical replacement parts.
This will ensure that the safety of the
power tool is maintained.
SPECIFIC SAFETY RULES
WARNING: Know your drill. Do
not plug in the drill until you have
read
and
Instruction Manual. Learn the
tool's applications and limitations,
as well as the specific potential
hazards related to this tool.
Following this rule will reduce the
risk of electric shock, fire, or serious
injury.
Always wear eye protection.
Any power tool can throw
foreign objects into your
eyes and cause permanent eye
damage. ALWAYS
goggles (not glasses) that comply
with ANSI safety standard Z87.1.
Everyday glasses have only impact
resistant lenses. They ARE NOT
safety glasses.
WARNING: Glasses or goggles
not in compliance with ANSI Z87.1
could cause serious injury when
they break.
WARNING: Always use a safety
understand
wear
safety
this
5

Advertisement

Table of Contents
loading

Table of Contents