Advertisement
Quick Links
This manual is written by E-Copter by courtesy for Logictech and Logictech users. For any information or comment
on the present manual or if you need any support, you can contact us at
manual if necessary. E-Copter allows usage of this manual with no restriction (copying, editing...). A fully editable
version is available on simple request by email at
E-Copter is the France and Monaco exclusive distributor of the LOGICTECH brand and products manufactured by
LOGICTECH, and thereby assures the After Sales Service and the User Support for materials purchased from
authorized dealers for these both countries.
Product Specifications:
High performance Heading Hold gyro, specially designed for electric powered helicopters .
- Immediate Initialization (Tail Lock mode).
- Removal of drift effects in the event of fast temperature changes during operation by internal software.
- Fully compatible with all types of transmitters and receivers.
- Support digital & analogics servos (Servo Speed function).
- Compatible with Logictech matched digital servos (LTS-6100G, LTS-3100G).
- Independent left and right mechanical servo limits.
- Self diagnosis function.
- Easy programming with one button ("Menu" button and transmitter rudder stick).
Technical Specifications:
- Voltage: 4.5 volts to 5.5 volts (nominal: 5 volts)
- Current draw: 20 Mah
- inputs: 2 (Anticouple, gain)
- Outputs: 1 (anti-servo)
- Gain Control: Remote (on a spare channel allocated for gyro gain)
- Programming: "Menu" button and rudder stick.
- Leds for programming values display / gain display: 8
- Dimensions: 22mmx22mmx11mm-Weight: 10 Grams
- Be sure to properly install and connect the wires/plugs. Do not to introduce any foreign substances in the product
(corrosive, conductive, flammable and any other type of Solid, liquid or chemical substances)
-Do not use the product under extreme conditions (conditions recommended: -5 ° to +35 °)
-Do not submit the product to sudden changes in temperature
-Be sure to install the product on a clean and degreased area to allow a suitable adhesive power to the adhesive pad.
- Be sure to install the product in a abnormal vibration free area / support.
-The product should not be dismantled / reassembled by anyone except by authorised people (Logictech
maintenance or authorised service)
-Stop using the product if you have a malfunction or failure of the product and consult immediately the after sale
service
- The gyroscope must be laid horizontally per respect to the axis of main rotor of the helicopter. Typically, the
gyroscope will be laid flat, with the LED and a button up on a standard helicopter. For other flying objects (UFO,,
aircraft, boats, motorcycles...),please note that the gyroscope compensates and corrects the cap through a virtual axis
crossing from top to bottom (face with leds / buttons being the top).
-
Be sure to install the gyroscope at a distance of at least 10 cm from the engine and as far as possible from the belt.
The functioning of the gyroscope could be disturbed by electromagnetic noises generated by these components.
LTG 2100 Manual for RCG guys by E-Copter ☺
info@e-copter.com
Safety tips / recommendations
Installing the gyroscope
www.e-copter.com
so we can update the
.
Advertisement
Related Manuals for Logictech LTG-2100
Summary of Contents for Logictech LTG-2100
- Page 1 LTG 2100 Manual for RCG guys by E-Copter ☺ This manual is written by E-Copter by courtesy for Logictech and Logictech users. For any information or comment on the present manual or if you need any support, you can contact us at www.e-copter.com...
- Page 2 They are also used to indicate the choosen value for a function during these steps 3) Servo Speed LED: when on, indicate that you are programming the type of servo used (Logictech matched digital servo, Standard Digital servo , standard analogic servo) .
- Page 3 If despite a perfect tail linkage adjustement in Rate mode (please see manual below for exmplanations) and a proper setup, your helicopter is still drifting, please contact your Logictech Service Center. It is possible, in some cases, after a hard crash, that the Gyro PCB has moved in the Gyro case and needs to be taped back in the gyro case. This allows the PCB to move in the case of a hard impact in order not to be damaged.
- Page 4 NOT be plugged in at this moment. During setup, the selection will be made through the first 3 leds. The LED 1 indicate the use of a Matched Logictech Servo ( LTS 6100G, LTS 3100G). The 2 led indicates the use of a standard digital servo.
- Page 5 STEP 7: SERVO LIMITS Your LOGICTECH gyroscope has a function for setting the mechanical limits of servo travel for both directions ( left and right), independently. This kind of setting which exists on high ends gyros generally exists only as a symmetrical value on same size gyros (one unique value acting on both directions).
- Page 6 Expo or Inverted Expo on the rudder channel. Gain channel is ONLY used for gain setting. Congratulations! You just finished programming your LOGICTECH LTG 2100 GYRO That said, good flights to all of you ☺ Team E-Copter & Logictech...