Advertisement
Wicher CDTV Card Installation
Installation of the card should always be performed with the Amiga being powered down.
Wicher CDTV card has been designed for installation inside the Amiga CDTV computer.
After removing the original MC68000 CPU, one can start the proper Wicher CDTV card installation. In order to carry it out,
the pins found at the bottom side of the card, should be carefully inserted into the U51 chip socket, and then the card
should be gently pressed, until it seats firmly.
As the next step, one should connect the two provided cables to the card's SV1 port, following the instructions presented
below.
Wicher CDTV
4
Advertisement
