Programme Selector Dial; Programme Progress Display - Tricity Bendix TBWD 1210 Operating & Installation Instructions Manual

End of programme
When the programme has finished a flashing zero is
displayed and the End pilot light
At the end of the Soak 30 programme, a flashing zero
is displayed, the End pilot light is
locked to indicate that the water must be drained.
If the Rinse hold option has been selected, a flashing
zero is displayed and the End and Rinse hold pilot
lights are on. The door is locked to indicate that the
water must be drained before opening the door.

13 Programme progress display

By selecting the wash programme, the pilot lights
corresponding to the various phases making up the
programme come on.
After the machine has started, only the running phase
light will illuminate and
When the programme has finished, the
illuminates.
In the event of operating problems the following alarm
code appearson the display.
= the machine does not fill
E E 1 1 0 0
= the machine does not empty
E E 2 2 0 0
= the door has not been closed
E E 4 4 0 0
To eliminate the problem, see paragraph "Something not
working".
illuminates.
on and the door is
stay on.
End pilot light

14 Programme selector dial

The selector is divided into 5 sections:
• Cottons
• Synthetics
• Delicates
• Wool
• Special programmes
• Reset programme Off
The selector dial can be turned either clockwise or
anticlockwise.
Position E60° or E40° corresponds to the ENERGY
SAVING programme and position
At the end of the programme the selector dial must
be turned to position "Off" (reset).
Functions
End of programme
When the End pilot light on the programme progress
display illuminates, the door can be opened
hold option has not been selected or at the end of the
Soak 30 programme).
Turn the programme selector dial to Off.
Switch the machine off by depressing the On/Off
button before removing the laundry.
Altering an option or a running programme
It is possible to change any option before the
programme carries it out.
Before you make any change, you must pause the
washer dryer by pressing the Start/Pause button.
Changing a running programme is possible only by
resetting it. Turn the programme selector dial to "Off"
and then to the new programme position. The washing
water in the tub will not empty out .
Start the new programme by depressing the Start/Pause
button.
9
to "cold wash".
(if the Rinse