The Control Panel - Tricity Bendix WDR 1030 Operating And Installation Instructions

The Control Panel

1 Programme guide
2 Drying indicator Light
This light illuminates when the machine is drying.
3 Drying time Selector Dial
Graduated up to 120 mins for cottons (dark green
section) and synthetics, (light green section) this dial
allows you to select the desired drying time according
to the type and quantity of laundry and the required
degree of dryness.
Turn the dial clockwise only.
Cooling phase
To allow the laundry to cool down, a cooling phase
starts automatically 10 minutes before the end of drying
and this phase must in no circumstances be reduced or
interrupted.
4 On/Off Button
By depressing this button the machine starts operating.
When depressed again, the machine stops.
5 HALF LOAD Button
Select this button to reduce water consumption on the
rinse cycle when washing a smaller load of cottons or
linens (maximum load size = 2.25 kg).
6 RINSE HOLD Button
Press this button to make the machine stop with water
in the drum after the cotton, synthetic or delicate wash
cycles.
This prevents any creasing which may take place if the
clothes are left damp in the drum. When it is
convenient for you to empty the machine, simply press
this button again so that the machine can proceed to
drain and spin, or select the drain programme "15".
If this button is not activated, the washing programmes
will end with a spin.
The Rinse Hold button must not be depressed when
using NON-STOP operation (automatic washing
and drying).
7 MAINS-ON Light
This light illuminates when the machine starts working
and goes out when the ON/OFF button is released.
8 Programme Selector Dial
Turn the dial clockwise to select the required wash and
drying programme.
Before setting the dial to any position the machine must
be switched off by depressing the ON/OFF button
again.
6