Advertisement
Quick Links
Please read all the instructions before assembly
Please read these instructions carefully before you start to assemble or use this table tennis table.
They contain important information relating to safety, assembly and maintenance.
We recommend you keep these instructions for future reference in case you need to order spare
Assembly should be carried out by two adults throughout each stage.
Preparation for use
1. Open the carton and check to ensure all accessories and fittings are complete.
2. Install 'T' rolling leg according to figure 1 below.
3. Tighten all screws and turn table up the right way ready for use.
Assembly Instructions
Carefully lay both table tops flat and face down on a soft surface. Unlock and unfold pre-assembled
table top, slide 'T' rolling leg into designated position and ensure marking tape lines up on each side,
see figure 1.
i-S12
INDOOR
parts or carry out any maintenance.
Tools required:
Figure 1
14mm
Page 1 / 3
Advertisement
Summary of Contents for Knight i-S12
- Page 1 Please read all the instructions before assembly Page 1 / 3 i-S12 INDOOR Please read these instructions carefully before you start to assemble or use this table tennis table. They contain important information relating to safety, assembly and maintenance. We recommend you keep these instructions for future reference in case you need to order spare parts or carry out any maintenance.
- Page 2 Please read all the instructions before assembly Page 2 / 3 Care and Maintenance 1. Move the two halves slightly away from each other before opening and closing, this will avoid any contact between the tops. 2. Do not use or store the table outside: both direct sunlight and damp conditions can cause the table to warp.
- Page 3 Caution: while assembling the product, keep out of the reach of children (choking hazard – contains small parts) • For any further information, please contact your KNIGHT dealer. • Do not use the table tennis table until it has been fully and correctly assembled and checked.