Download Print this page

Advertisement

Quick Links

INSTRUCTIONS VLUV STOV

Advertisement

loading
Need help?

Need help?

Do you have a question about the STOV and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for VLUV STOV

  • Page 1 INSTRUCTIONS VLUV STOV...
  • Page 2: Important Safety Notes

    Manufacturer, importer and reseller cannot be made liable for any misuse and thereof resulting accidents, injuries, damages, etc.  VLUV is NOT a toy! Please do not let children play with it without supervision.  Keep your pets away from the product.
  • Page 3 2-3 degrees can change the pressure of the ball.  Please always check the pressure of the ball before usage.  Please inflate the VLUV at room temperature ONLY! Don’t inflate the ball in cold conditions! Please let the ball adapt to the room temperature before inflation.
  • Page 4: General Setup Instructions

    GENERAL SETUP INSTRUCTIONS 1. Place the fabric cover flat on a table or on the clean floor. Zipper is facing to the ceiling. Open the zipper. Take the folded PVC inner ball and unfold it. Fold it back as before to a roll. Lift the fabric cover on the zipper and insert the PVC ball.
  • Page 5 Insert folded inner ball Valve hole centered between zipper 2. (This point applies only if you use our VLUV air pump) Remove the valve plug, if still inserted. Insert the pump adaptor snug into the valve hole. To fix the pump adaptor to the pump head, insert the thread part into the pump head. Take care that the pump head lever is in open position.
  • Page 6 3. Guide the valve opening steadily centered between the zipper opening. Try to hold the inner ball outside during inflation as long as possible. Alsways push and move the inner ball during the inflation and guide it centered. Keep the valve hole outside if possible Guide the inner ball centered Close zipper partially IMPORTANT: THE MAIN GOAL IS THAT THE INNER BALL IS CENTERED WITHIN THE ZIPPER...
  • Page 7 If the ball is inflated already 80-90% you can close the zipper partially which eases the closure later. NOTE: If using an air pressure compressor the ball cover and the zipper can tear apart. We do not overtake any responsibility in this case. The correct pressure is reached if the ball shows only slight wrinkles on a few places.
  • Page 8 Please guide the zipper pull to the outside, otherwise it will be pinched from the inner ball. To close the zipper please push the inner ball down under the zipper pull, it will ease the closure. Please guide the zipper pull into the cover to prevent floor damage.
  • Page 9 Dont place the ball in direct sun light. The VLUV is made for indoor usage only. It is not made for outdoor usage. If there is any damage or defect visible on the ball you must not use it and inform our service team for further instructions.
  • Page 10 The polyester fabric that we use is robust and resistant. During normal usage you will enjoy using the VLUV for a long time. Nonetheless, please care about the following points: Darker, intensive fabric color pigments can in some cases rub off. PLEASE BE VERY CAREFUL WITH BRIGHT CARPETS AND BRIGHT/WHITE CLOTHES.
  • Page 11: Warranty

    This warranty gives you specific legal rights and you may also have other rights which can vary from state to state. Should you have a claim, please contact us before returning your product. e-Mail: info@vluv.de VLUV is a brand of: HOCK Inh.: Kristof Hock Koelner Str. 45...