Working With The Microlab Software; Installation; System Requirements - Oakton TempLog User Manual

Chapter 1

1.4. Working with the MicroLab Software

1.4.1.
1.

System Requirements

To work with MicroLab, your system should be equipped with the
following:
Software
Windows 95, or later (Windows 95 will not support USB)
Internet Explorer 4.0 or later (you can install Internet Explorer 5
when you install OaktonLog Plus, since it ships with the product)
Hardware
Pentium 300MHz or higher
32 MB RAM (64 MB recommended)
5MB available disk space for the MicroLab application
38
OaktonLog

Installation