Table of Contents
Advertisement
Chapter 2
Timer run
Cyclic run
142
OaktonLog Plus
and thirty seconds, click the hours (hh) and type
1 or use the arrows to select 01, then click the
minutes (mm) and type 5 or use the arrows, and
finally, click the seconds (ss) and type 30 or
select 30 using the arrows.
Click the Timer run check box if you want
OaktonLog to start recording at a predetermined
time. This option is convenient if you are using
several OaktonLogs at once and want them to
all begin logging at the same time.
Use the time and date selectors to set the start
time.
In Cyclic run mode, OaktonLog overwrites the
old measurements (starting with the oldest one)
Advertisement
Table of Contents
