Roksan Audio Corus2 User & Installation Manual

S AF E TY P R E CAUT I O N S
• Keep the product away from small children to avoid
accidents.
• Do not put the product in a location where it is exposed
to direct sunlight, near heating devices, high humidity, or
high concentrations of dust.
• Do not touch the stylus cantilever or other exposed parts
to avoid damage.
• Do not attempt to disassemble or modify the cartridge.
• Do not subject the product to strong impact.
CA RE
Use a stylus brush to remove dirt and dust from the stylus tip.
Always move the brush in the direction in which the record
rotates. Clean the record using a record cleaning brush before
playing.
CO N TACT U S
Roksan
24 Brook Road,
Rayleigh,
Essex
SS6 7XJ, UK
+44 (0)1268 78900
info@roksan.com
roksan.com
SP EC IFI CAT IO N S
Type: VM dual moving magnet
Frequency response: 20 to 27,000Hz
Output voltage: 3.5mV (1kHz, 5cm/sec.)
Channel separation: 25dB (1kHz)
Output balance: <1.5dB (1kHz)
Tracking force: 1.8 to 2.2g (2.0g standard)
Coil impedance: 3.2 kOhms (1kHz)
Recommended load impedance: 47 kOhms
Stylus: Nude Shibata
Cartridge body: Aluminium
Cantilever: Aluminium tapered pipe
Dimensions (H × W × D) : 17.3 × 17.0 × 28.2mm
Weight: 8.0g
Replacement stylus (sold separately): CORUS2STY
Accessories: Cartridge installation hardware.
All specifications are liable to change without notice. E&OE
Printed in England
Please visit roksan.com/videos/corus2
or scan this QR code to view the
installation video
Corus2
Cartridge
User & Installation Manual