Advertisement
AVerKey300
The AVerKey300 is an external PC/MAC/NEC-to-TV Scan Converter. It converts computer
images into video format and displays them on any TV monitor or large-Screen LCD projector.
This is "Plug and Play" with no software drivers required. The AVerKey300 is compatible with all
computers and operating systems.
Advertisement
Table of Contents
Related Manuals for AVer AVerKey300
Summary of Contents for AVer AVerKey300
- Page 1 The AVerKey300 is an external PC/MAC/NEC-to-TV Scan Converter. It converts computer images into video format and displays them on any TV monitor or large-Screen LCD projector. This is “Plug and Play” with no software drivers required. The AVerKey300 is compatible with all computers and operating systems.
- Page 2 Plug one end of the supplied Computer Extension Cable to the AVerKey300 “VGA IN” port and the other end to the PC’S VGA Port. 2) Connect the VGA monitor cable to the AVerKey300 “VGA OUT” port and the other end of this cable to the back of the computer monitor.
- Page 3 3) Plug the supplied AC Power Adapter into the AVerKey300 “POWER” port. Plug the other end of the cable into an electrical outlet. 4) The S-Video Cable fits into the side of the AVerKey Box and connects to the S-Video...
- Page 4 If there is no picture on the TV 1) Check all the connectors again. Remember, when replacing a portion of the AVerKey300 such as a cable or power cord, you must have an AVerKey300 system that you know all the parts are working correctly. Disconnect each cable, AVerKey300 box, or cord one at a time, reconnecting the new cable, box or cord.
Need help?
Do you have a question about the AVerKey300 and is the answer not in the manual?
Questions and answers