Subscribe to Our Youtube Channel
Related Manuals for Linsar VT869RED
Summary of Contents for Linsar VT869RED
- Page 4 can be used . In a safe way and understand the hazards involved.
- Page 5 Handle with care to avoid spillage on the connector and base. Do not open the lid while water is boiling SAVE THESE INSTRUCTIONS...
- Page 6 ON/OFF Switch and variable temperature control...
-
Page 8: Boiling Water
Boiling water Open the lid of the kettle and fill to maximum water level 1.7ltr (Minimum water level is 0.8ltr) Once the kettle is placed on the kettle base and power is switched on it is ready to use. The kettle will be in standby until 0/I button is pressed at which time the + and –... - Page 9 Method one: Press the 'O/I' directly, at this time, the display shows "100" and flashes (one key to boil water function). In this case, the kettle boils the water to 100℃ by default. In the process of boiling water, press '+' or '-', you can reset the temperature at any time.
- Page 10 During the normal boiling water process the + or – buttons can be used to change the desired temperature. When the water reaches the set temperature it will change to the keep warm function. Please note that after 2 hours the display will go off and the kettle will return to standby.
Need help?
Do you have a question about the VT869RED and is the answer not in the manual?
Questions and answers